where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
1364 views
Career Discussions
Jaeseok Park
R & D,
DOOSAN, South Korea, Joined Jun 2009, 10

Jaeseok Park

R & D,
DOOSAN,
South Korea,
Joined Jun 2009
10
07:16 Jun-15-2009
EN Standards for Visual Testing

Would you inform me the list of EN Standards related with Visual & Optical Testing ?
and, What would be the most basic one for VT, like EN583 of UT ?

Thank you.

 
 Reply 
 
Charles Kovacshazy
Engineering, EDM specialists Calibration Standards
SITCO Precision Machining Co. Ltd., Canada, Joined Jun 2009, 3

Charles Kovacshazy

Engineering, EDM specialists Calibration Standards
SITCO Precision Machining Co. Ltd.,
Canada,
Joined Jun 2009
3
20:50 Jun-17-2009
Re: EN Standards for Visual Testing
In Reply to Jaeseok Park at 07:16 Jun-15-2009 (Opening).

I am not aware of a standard for corrosion patterns and in retrospect I should have referred to them as advanced artificial flaws.
Crack-like notches and corrosion patterns are made by EDM (Electrical Discharge Machining). Visual comparison is obviously possible to see if it resembles the real flaw but more detailed information can be attained from the inspection report. For example average Pit Depths (wall loss), hemi-spherical radii, EDM texture Rz, material specs, and wall thickness and more. Our expertise is in manufacturing calibration standards for UT and ET.
Thanks for your response let me know if you need more info. Charly.

 
 Reply 
 
Jukka Hakala
Director,
NDT-Team Oy, Finland, Joined Oct 2004, 7

Jukka Hakala

Director,
NDT-Team Oy,
Finland,
Joined Oct 2004
7
22:39 Jun-17-2009
Re: EN Standards for Visual Testing
In Reply to Jaeseok Park at 07:16 Jun-15-2009 (Opening).

Here is something to read:
EN 13018 NDT, Visual testing, General principles
EN 1330-10 Vocabulary- Part 10: Terms used in visual testing
EN 13927 NDT, Visual testing, Equipment
EN 970 (corresponding ISO 17637) Non-destructive examination of fusion welds- Visual examination
EN 12454 Founding- Visual examination of surface discontinuities - Steel sand castings

 
 Reply 
 
Udo Schlengermann
Consultant, -
Standards Consulting, Germany, Joined Nov 1998, 178

Udo Schlengermann

Consultant, -
Standards Consulting,
Germany,
Joined Nov 1998
178
11:49 Jun-18-2009
Re: EN Standards for Visual Testing
In Reply to Jukka Hakala at 22:39 Jun-17-2009 .

Hello,
in the European Standards system for each NDT method generally there are standards on: the Basics - Terminology - Procedures - Acceptance levels - Equipment - Calibration material.
For Visual Testing (VT) Jukka Hakal has listed most of them.
I only want to add:
EN 13100-1:1999 - Non destructive testing of welded joints of thermoplastics semi-finished products - Part 1: Visual examination;
Additionally there are numerous EN's on products, where VT is required: for textiles, for wood, for asphalt pavements, for electronic devices, for optical fibres, etc.
Only two examples:
EN 14480:2002 - Metallic industrial piping - Part 5: Inspection and testing;
EN ISO 945-1:2008 - Microstructure of cast irons - Part 1: Graphite classification by visual analysis (ISO 945-1:2008);

Best regards
Udo Schlengermann

 
 Reply 
 
Jaeseok Park
R & D,
DOOSAN, South Korea, Joined Jun 2009, 10

Jaeseok Park

R & D,
DOOSAN,
South Korea,
Joined Jun 2009
10
02:47 Jun-19-2009
Re: EN Standards for Visual Testing
In Reply to Jaeseok Park at 07:16 Jun-15-2009 (Opening).

Thank you for your informations all.

 
 Reply 
 

Product Spotlight

NDT Master Lecturer

In the program both university professors and practitioners will give lectures, which guarantees the
...
oretical depth and practical inside. Academic Director: Prof. Dr. Christian Boller
The following lecturers are not complete: Prof. Tadeusz Stepinski, Prof. Wieslaw Staszewski, Prof. Frank Walther, Prof. Giovanni Bruno, Prof. Gerd Dobmann, Prof. Philippe Guy
>

Silverwing RMS PA - Phased-array corrosion mapping

Eddyfi Technologies integrated two market leading solutions, Silverwing’s RMS and M2M’s instru
...
ments to provide a high-speed, remote access ultrasonic phased-array inspection system with live total focusing method (TFM).
>

NEW! The PragmaPro Instrument Platform

The PragmaPro is based on a modular cartridge technology and supports various NDT instrument modal
...
ities such as UT, PAUT, ECT and many more. This new platform is based on a machined, powder-coated aluminum frame for shock-proofness, best sealing qualities and maximum heat dissipation. This is practical to extend the outdoor temperature range and/or to extend the power injected in the transducers. The PragmaPro is aiming at a very wide range of applications, such as weld scanning, corrosion mapping and composite testing.
>

Ultrasonic Testing Immersion Tanks with Unmatched Scanning Features

TecScan’s non-destructive testing Ultrasonic Immersion Tanks & scanners are designed for high pe
...
rformance and demanding NDT testing applications. Our Scan3D™ line of High Precision Immersion Tanks are specifically designed for automated ultrasonic testing of complex composites parts used in aerospace and industrial applications.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window