where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

YXLON International GmbH
YXLON International - innovative High-Tech-Company with long traditionYXLON International develops, manufactures and markets digital radios ...
345 views
Technical Discussions
zaidi
zaidi
05:18 Jun-16-2009
Instrument with attenuation : b-a-c

Hi everyone,

I've been confusing about expression "Instrument with attenuation : b-a-c" in AWS D1.1 2006 Sect.6.26.6.5.Could you please explain me about it, And when we have to use the formula(b-a-c) instead of the a-b-c? As my knowledge that most UT Technicians only use the a-b-c when they evaluate every defect found.Thanks in advance for further kind explaination.

Best Regards,
Zaidi

 
 Reply 
 
Ed T.
Ed T.
08:27 Jun-16-2009
Re: Instrument with attenuation : b-a-c
In Reply to zaidi at 05:18 Jun-16-2009 (Opening).

Some of the UT instruments "in the old days" had atenuation controls rathe rthan gain controls. It would reduce gain as you turned it up rather than increase gain. I am not even aware of any modern day instrumentsthat have it.

It's just the opposite so AWS used "b-a-c=d" instead of "a-b-c=d".

 
 Reply 
 

Product Spotlight

Semi-Automated Phased Array Immersion System for Small Composite Parts

Turn-key semi-automated system as an improved and affordable solution for inspection of small comp
...
osite parts. Includes support table, immersion tank, scanner, PA instrument, PC, Analysis software, database, wedge management and other options.
>

FAAST-PA! OEM Patented phased Array for high speed UT inspection

Multiangle, Multifocus, Multifrequency, Multibeam. Instead of stacking UT electronics and having m
...
any PA probes, FAAST-PA is able to transmit all delay laws within ONE single shot in Real time.
>

ISAFE3 Intrinsically Safe Sensor System

ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
...
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
>

SITEX CPSERIES

Teledyne ICM’s CPSERIES has been designed with a view to revolutionizing the handling and perfor
...
mances of portable X-Ray sets. Despite having managed to halve the weight of similar portable X-Ray generators available on the market (while continuing to provide the same power output), the SITEX CPSERIES generators feature a shutter, a laser pointer, a beryllium window, an aluminum filter and two integrated diaphragms (customized sizes are available upon request). Without compromising the robustness and reliability for which ICM products are renowned, the small size and light weight of the SITEX CPSERIES will radically change the way that you perform your RT inspections. And you will see a positive impact in terms of both quality and return on investment (ROI).
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window