where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
542 views
Technical Discussions
Sam
Sam
18:38 Jul-03-2009
Coating damage assessment of buried pipeline

Any sugggestions to assess the extend of exteranl coating damage or external corrosion on a burried pipeline (let us say for 24"line). We are not concerned about any internal corrosion.
Thanks
Sam

 
 Reply 
 
Creed
NDT Inspector,
n.n., Joined Jul 2009, 28

Creed

NDT Inspector,
n.n.,
Joined Jul 2009
28
06:43 Jul-08-2009
Re: Coating damage assessment of buried pipeline
In Reply to Sam at 18:38 Jul-03-2009 (Opening).

Why dont you try DCVG to inspect the external coating for burried pipeline?

 
 Reply 
 
Ahmad Sawalha
Ahmad Sawalha
18:16 Jul-15-2009
Re: Coating damage assessment of buried pipeline
In Reply to Creed at 06:43 Jul-08-2009 .

Dear sam,
you can try guided wave or corrosion scan, but first you need to do an economical study for cause this technology is very expensive

regards
ahmad sawalha
inspection engineer
JBC

 
 Reply 
 

Product Spotlight

Immersion systems

ScanMaster ultrasonic immersion systems are designed for high throughput, multi shift operation in a
...
n industrial or lab environment. These fully integrated systems provide various scanning configurations and incorporate conventional and phased arrays technologies to support diverse applications, such as inspection of disks, bars, shafts, billets and plates. All of ScanMaster immersion systems are built from high accuracy scanning frames allowing for scanning of complex parts and include a multi-channel ultrasonic instrument with exceptional performance. The systems are approved by all major manufacturers for C-scan inspection of jet engine forged discs. Together with a comprehensive set of software modules these flexible series of systems provide the customer with the best price performance solutions.
>

HARDNESS TESTER TKM-459CE combi

TKM-459CE combi applies 2 methods of hardness control: UCI and Leeb. It provides high-accuracy tes
...
ting of metals and alloys as well as items of different sizes and configurations, their hardened layers and galvanic coatings. Device represents results in HB, HRC, HV and others. Shock-, dust- and water-proof housing with intuitive software make this gauge easy to use in all working conditions.
>

IRIS 9000Plus - Introducing the next generation of heat exchanger inspection.

Representing the seventh generation of the IRIS system, the IRIS 9000 Plus has nearly 200 years of c
...
ombined field inspection experience incorporated in its design. This experience combined with a strong commitment to quality and a history of innovation has made Iris Inspection Services® the undisputed leader in IRIS technology.
>

Sci Aps Z-Series Portable Handheld Analysers

The world’s only handheld analyzer that measures carbon content in stainless (yes even L-grades),s
...
teels, and cast irons. Also accepted for low Si analysis for sulfidic corrosion analysis, and is widely used in the power industry for Cr analysis, for flow accelerated corrosion applications.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window