where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
740 views
Technical Discussions
Liliana Silva
Engineering,
ISQ, Portugal, Joined Feb 2009, 2

Liliana Silva

Engineering,
ISQ,
Portugal,
Joined Feb 2009
2
17:45 Jun-17-2009
Computed Radiography

In the last months I have been working with Computed Radiography. I am using image plates from DURR. Has anyone has experience with these image plates? I would like to change some ideas!
Thanks in advance.
Liliana

 
 Reply 
 
Mr.charles
Mr.charles
10:02 Jun-18-2009
Re: Computed Radiography
In Reply to Liliana Silva at 17:45 Jun-17-2009 (Opening).

I used the same machine.

Do you have any problems,please contact me.

 
 Reply 
 
adex609 qorie
adex609 qorie
19:18 Jul-04-2009
Re: Computed Radiography
In Reply to Liliana Silva at 17:45 Jun-17-2009 (Opening).

Yes, i'm also use the same equipment.

 
 Reply 
 

Product Spotlight

FD800 Bench Top Flaw Detectors

The bench-top FD800 flaw detector range combines state-of-the-art flaw detection with advanced mater
...
ial thickness capabilities. Designed for use in the laboratory these gauges are the tool you need for all your flaw detecting needs.
>

Semi-Automated Phased Array Immersion System for Small Composite Parts

Turn-key semi-automated system as an improved and affordable solution for inspection of small comp
...
osite parts. Includes support table, immersion tank, scanner, PA instrument, PC, Analysis software, database, wedge management and other options.
>

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

Research and Application Development For NDT

Acuren’s Research and Application Development specializes in the development of advanced ultraso
...
nic inspection techniques and systems for challenging inspection applications, with an emphasis on practical solutions which are field deployable. Services include manual and automated ultrasonic inspection system development, inspection technique optimization using laboratory scale studies and ultrasonic modeling (CIVA, BeamTool), preparing technical justification for technique evaluation and qualification (Probability of Detection and sizing accuracy studies), inspection/calibration/analysis procedure preparation to support field deployment of custom techniques, and development of custom imaging algorithms to support challenging inspection applications.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window