where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Hillger Ing. Büro
was founded in 1984 and develops special ultrasonic imaging systems for high-tech materials.
351 views
Technical Discussions
Nick Welland
Nick Welland
01:56 Jun-26-2001
Bond testing of PE pipe

Has anyone had success UT testing for lack of bond in electrically-heated pipe sleeve joints in PE pipe? The bonding heat element wires give a high echo very near to the expected line of fusion.
Regards
Nick Welland


 
 Reply 
 
Richard Kazares
Richard Kazares
03:54 Jun-26-2001
Re: Bond testing of PE pipe
You obviously have a very specific problem.

If a direct A-Scan (time domain) does not produce enough differentiation of signal - it is possible that an FFT (frequency domain) evaluation might help - in producing a signal with enough differentiation to show signal differences between the heating wire - with and without a weld flaw present.

We would be happy to work with you on this.

Please respond directly and we can discuss options.


: Has anyone had success UT testing for lack of bond in electrically-heated pipe sleeve joints in PE pipe? The bonding heat element wires give a high echo very near to the expected line of fusion.
: Regards
: Nick Welland
.



 
 Reply 
 
Hyeon Jae Shin
Hyeon Jae Shin
09:02 Sep-04-2001
Re: Bond testing of PE pipe
We had success UT testing for lack of bond in electrically-heated pipe sleeve joints in PE pipe.
We can identify each wire's specing and location in real time images. The line of fusion is also detected and saperated from the signal from wires in the UT images if the fusion is not pefect.
We are using multi element array system that was developed in our company "INDE SYSTEM Co., Ltd."
The product will be in the market within few monthes.

Regards
Hyeon Jae Shin
INDE SYSTEM Co., Ltd
email: indesystem@orgio.net
.



 
 Reply 
 

Product Spotlight

FD800 Bench Top Flaw Detectors

The bench-top FD800 flaw detector range combines state-of-the-art flaw detection with advanced mater
...
ial thickness capabilities. Designed for use in the laboratory these gauges are the tool you need for all your flaw detecting needs.
>

iProbe - USB Phased Array Probe

Turn your PC, Laptop or Tablet into a powerful 32:64 Phased Array system with our USB powered Phas
...
ed Array iProbe and inspection software package. Perform affordable weld inspection and corrosion mapping inspections with this powerful but small system. The probe has a 100V pulser, 8K PRF, dual axis encoder input and achieves outstanding signal quality.
>

YXLON Cougar EVO

Scalable small footprint X-ray inspection systems for assembly and laboratory applications. The
...
YXLON Cougar EVO series was designed to provide the "best-in- class" inspection solutions for SMT, semiconductor, and laboratory assembly applications, while maintaining a small system footprint for maximum convenience. With optimized software and hardware, these systems produce higher quality and more consistent results than other electronics inspection systems currently on the market.
>

CIVA 2020 UT Module

CIVA NDE Simulation Software is the world leader of NDT Simulation. The UT simulation Module incl
...
udes: - "Beam computation": Beam propagation simulation - "Inspection Simulation": Beam interaction with flaws or specimens The user can simulate a whole inspection process (pulse echo, tandem or TOFD) with a wide range of probes (conventional, Phased- arrays or EMAT), components, and flaws.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window