where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

306 views
Job Seeks
Mohamed Farouk
Teacher, NDT & welding Instructor & Lecture
Egyptian Welding Academy, Egypt, Joined Nov 2007, 4

Mohamed Farouk

Teacher, NDT & welding Instructor & Lecture
Egyptian Welding Academy,
Egypt,
Joined Nov 2007
4
23:21 Jul-08-2009
Welding inspector

Job Location: Middle East

I'm Instructor/ Trainer at Egyptian Welding Academy, have International Welding Engineer (IWE) diploma (United European certificate, EUROPEAN FEDERATION FOR WELDING, JOINING AND CUTTING authorization - EWF-Passport) and metallurgy engineering degree ( 5 years degree), and have NDT method Levels II (UT, RT, PT, MT).

I have experience at NDT and Welding as Instructor/ Lecture since Apr. 1, 2009 until now, Welding Electrode/ Flux Fabrication Specialist (from 4/2008 until Apr. 1, 2009), and NDT 13 months before Apr. 2008, with total experience 17 years.

Looking for a challenging career opportunity in a reputable multinational organization at an Arabian country to work as NDT and Welding Instructor/ Lecture, or Fitness-for-Service Eng., or Risk-Based Assessment Eng. or Welding Inspector.

Best regards,
Mohamed Farouk
Mob: 002 0119112833
002 0122728570
Moh_farouq@yahoo.com

 
 

Product Spotlight

Robotic laser shearography enables 100% inspection of complex, flight-critical composite structures

An article in “Composites World Magazine” showcases Non Destructive Testing of aero-structures
...
with Laser Shearography. Over the years Dantec Dynamics has supplied many solutions for the aerospace industry. Referring to specific customer projects several of these cases are examined to outline the advantages of using Laser Shearography for automated defect detection.
>

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

NDT.net launches mobile-friendly design

NDT.net has revamped its website providing a mobile-friendly design.The front page received a comp
...
letely new design and all other sections are now reacting responsively on mobile devices. This has been a major step to make our website more user- friendly.
>

On Demand Webinar: Using Eddy Current Array for Large Areas in Place of Magnetic Particle and Liquid Penetrant Testing

New on-demand webinar on the use of eddy current array (ECA) technology in lieu of liquid penetrant
...
testing (PT) and magnetic particle testing (MT) for large area screenings. The webinar includes an introduction to the technologies with advantages and disadvantages of each. Side by side examples are discussed including aircraft stringers, engine blades, forgings, weld plates & more. View it today.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window