where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

GB Inspection Systems Ltd.
A leading UK manufacturer of Ultrasonic Probes, Accessories, Supplier of NDT Equipment and more.
352 views
Technical Discussions
Nick Welland
Nick Welland
01:56 Jun-26-2001
Bond testing of PE pipe

Has anyone had success UT testing for lack of bond in electrically-heated pipe sleeve joints in PE pipe? The bonding heat element wires give a high echo very near to the expected line of fusion.
Regards
Nick Welland


 
 Reply 
 
Richard Kazares
Richard Kazares
03:54 Jun-26-2001
Re: Bond testing of PE pipe
You obviously have a very specific problem.

If a direct A-Scan (time domain) does not produce enough differentiation of signal - it is possible that an FFT (frequency domain) evaluation might help - in producing a signal with enough differentiation to show signal differences between the heating wire - with and without a weld flaw present.

We would be happy to work with you on this.

Please respond directly and we can discuss options.


: Has anyone had success UT testing for lack of bond in electrically-heated pipe sleeve joints in PE pipe? The bonding heat element wires give a high echo very near to the expected line of fusion.
: Regards
: Nick Welland
.



 
 Reply 
 
Hyeon Jae Shin
Hyeon Jae Shin
09:02 Sep-04-2001
Re: Bond testing of PE pipe
We had success UT testing for lack of bond in electrically-heated pipe sleeve joints in PE pipe.
We can identify each wire's specing and location in real time images. The line of fusion is also detected and saperated from the signal from wires in the UT images if the fusion is not pefect.
We are using multi element array system that was developed in our company "INDE SYSTEM Co., Ltd."
The product will be in the market within few monthes.

Regards
Hyeon Jae Shin
INDE SYSTEM Co., Ltd
email: indesystem@orgio.net
.



 
 Reply 
 

Product Spotlight

SITEX CPSERIES

Teledyne ICM’s CPSERIES has been designed with a view to revolutionizing the handling and perfor
...
mances of portable X-Ray sets. Despite having managed to halve the weight of similar portable X-Ray generators available on the market (while continuing to provide the same power output), the SITEX CPSERIES generators feature a shutter, a laser pointer, a beryllium window, an aluminum filter and two integrated diaphragms (customized sizes are available upon request). Without compromising the robustness and reliability for which ICM products are renowned, the small size and light weight of the SITEX CPSERIES will radically change the way that you perform your RT inspections. And you will see a positive impact in terms of both quality and return on investment (ROI).
>

Conformable wedge transducer

The conformability is obtained with a flexible membrane filled with water between the transducer and
...
the inspected component. The coupling between the membrane and the component requires a small quantity of water or couplant. The conformable wedge combines the acoustic performance of immersion technique with good coupling and low attenuation.
>

GUL QSR1® Scanning

How do you measure pipe wall thickness without direct access to the area? QSR® Scanning - Guide Wav
...
e Quantitative Short Range Scanning.
>

Ultrasonic tomograph for imaging of concrete structures А1040 MIRA

Applicable for concrete inspection allowing imaging of the internal structure of objects from conc
...
rete, reinforced concrete, different stones. The operation applies pulse-echo technique at one-side access to the object. The instrument is feasible for concrete inspection for searching conduct ducts, conduits, detection of foreign inclusions, holes, honeycombing, cracks and other concrete defects.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window