where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
340 views
Job Seeks
Mohamed Farouk
Mohamed Farouk
13:06 Jul-16-2009
Welding Inspector

Job Location: UAE, SAUDIYA

I'm Instructor/ Lecture at Egyptian Welding Academy, have International Welding Engineer (IWE) diploma (United European certificate, EUROPEAN FEDERATION FOR WELDING, JOINING AND CUTTING authorization - EWF-Passport ID) and metallurgy engineering degree ( 5 years degree), and have NDT method Levels II (UT, RT, PT, MT).

I have experience at NDT and Welding as Instructor/ Lecture since Apr. 1, 2009 until now, Welding Electrode/ Flux Fabrication Specialist (from 4/2008 until Apr. 1, 2009), and NDT 13 months before Apr. 2008, with total experience 17 years.

Looking for a challenging career opportunity in a reputable multinational organization to work as NDT and Welding Instructor/ Lecture, or Fitness-for-Service Eng., or Risk-Based Assessment Eng. or Welding Inspector, Welding QC.
Please review my resume at: http://faroukgroup.tripod.com/weldndt/cv.doc
And see my published work at: http://faroukgroup.tripod.com/weldndt

Best regards,
Mohamed Farouk
Mob: 002 0119112833
July 15, 2009

 
 

Product Spotlight

AIS229 - Multipurpose Real Time System

Latest standard & automatic real time system developed by Balteau. The AIS229 has been designed to
...
do series inspection in a wide variety of industry. Composed of a shielded cabinet, 5 axis manipulator, x-ray generator and tubehead from 160kV to 225kV, a fl at panel & much more, the AIS229 is most certainly one of the most multipurpose RTR system available on the market.
>

ISAFE3 Intrinsically Safe Sensor System

ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
...
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
>

Cygnus 6+ PRO Multi-Mode Ultrasonic Thickness Gauge

The Cygnus 6+ PRO thickness gauge is the most advance gauge within the Cygnus range with key featu
...
res including: comprehensive data logging; A-scan and B-scan display; manual gain control; Bluetooth connectivity; and much more. With its unique dual display and three measuring modes (Multiple-Echo, Echo-Echo and Single-Echo), this surface thickness gauge offers maximum versatility for inspections.
>

FD800 Bench Top Flaw Detectors

The bench-top FD800 flaw detector range combines state-of-the-art flaw detection with advanced mater
...
ial thickness capabilities. Designed for use in the laboratory these gauges are the tool you need for all your flaw detecting needs.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window