where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
790 views
Technical Discussions
Jiri Brus
Jiri Brus
10:02 Jul-24-2009
bond tester - signal evaluation

We are working with ZETEC Bond Tester S21R in sondicator mode for honeycomb structure test. We are able to record 1inch D disbond, but indication from that decrease to 1/2 of origin using 12 dB. It is OK ? According to general formula 20log H1/H2 should be 6 dB. Do you have anybody explanation ? Thank you.

 
 Reply 
 
Joe Buckley
Consultant, ASNT L-III, Honorary Secretary of BINDT
Level X NDT, BINDT, United Kingdom, Joined Oct 1999, 523

Joe Buckley

Consultant, ASNT L-III, Honorary Secretary of BINDT
Level X NDT, BINDT,
United Kingdom,
Joined Oct 1999
523
11:55 Jul-24-2009
Re: bond tester - signal evaluation
In Reply to Jiri Brus at 10:02 Jul-24-2009 (Opening).

The Gain steps on The Zetec MIZ-21 series are 1/2 dB, Not 1 dB so a gain change of 12 is 6dB

This is explained in the manual, (Section 4.5.8 Probe Gain, page 4-13 in the MIZ-21 Manual, I don't have the S21R version immediately to hand) but who reads them that closely...

I have to say it confused me at first, and on a bad day it still does...

Joe

 
 Reply 
 
joel nyaga
joel nyaga
10:41 Sep-07-2019
Re: bond tester - signal evaluation
In Reply to Joe Buckley at 11:55 Jul-24-2009 .

Who could be having a zetec bond tester S-21R version to send to me. am having problems trying to use x-y mode (flying dot disbond measurement) and delamination setups.

 
 Reply 
 

Product Spotlight

Aerospace Systems - Automated Ultrasonic Inspection

USL are specialists in the design and manufacture of turnkey ultrasonic inspection systems for aer
...
ospace applications. From monolithic composites to complex honeycomb structures. This video shows just a few examples of what is possible, find out more at: www.ultrasonic-sciences.co.uk
>

NEW Wheel Type Phased Array Probe

DOPPLER NEW Wheel Type Phased Array Probe, more stable, new tyre makes lesser acoustic attenuation
...
, much lighter makes easier to handle, more slim size, magnetic and mechanical encoder optional etc...more
>

GEKKO - Portable Phased Array Testing with TFM in Real-Time

The portable phased array testing system GEKKO provides 64 parallel test channels. On creating testi
...
ng parameters the operator is assisted by the CIVA software. Due to its modular set-up the GEKKO instrument is suitable for operators of all skill levels.
>

Research Center IDEKO develops an ultrasonic train wheel inspection system for CAF

The Basque Research centre IK4-IDEKO has developed a state-of-the-art ultrasonic inspection system f
...
or the train wheel. This system secures a sound condition of train wheels and is thus a significant contribution to rail transport safety. The device was delivered to CAF recently and its use allows the manufacturer to become an approved supplier of rolling stock in Italy, as it meets the demanding homologation standards of this country. \\\\r\\\\n
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window