where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Vallen-Systeme GmbH
The Acoustic Emission Company! Since 1987 Vallen stands for competence and continuity in AE and for reliable business cooperation and support.
787 views
Technical Discussions
Jiri Brus
Jiri Brus
10:02 Jul-24-2009
bond tester - signal evaluation

We are working with ZETEC Bond Tester S21R in sondicator mode for honeycomb structure test. We are able to record 1inch D disbond, but indication from that decrease to 1/2 of origin using 12 dB. It is OK ? According to general formula 20log H1/H2 should be 6 dB. Do you have anybody explanation ? Thank you.

 
 Reply 
 
Joe Buckley
Consultant, ASNT L-III, Honorary Secretary of BINDT
Level X NDT, BINDT, United Kingdom, Joined Oct 1999, 523

Joe Buckley

Consultant, ASNT L-III, Honorary Secretary of BINDT
Level X NDT, BINDT,
United Kingdom,
Joined Oct 1999
523
11:55 Jul-24-2009
Re: bond tester - signal evaluation
In Reply to Jiri Brus at 10:02 Jul-24-2009 (Opening).

The Gain steps on The Zetec MIZ-21 series are 1/2 dB, Not 1 dB so a gain change of 12 is 6dB

This is explained in the manual, (Section 4.5.8 Probe Gain, page 4-13 in the MIZ-21 Manual, I don't have the S21R version immediately to hand) but who reads them that closely...

I have to say it confused me at first, and on a bad day it still does...

Joe

 
 Reply 
 
joel nyaga
joel nyaga
10:41 Sep-07-2019
Re: bond tester - signal evaluation
In Reply to Joe Buckley at 11:55 Jul-24-2009 .

Who could be having a zetec bond tester S-21R version to send to me. am having problems trying to use x-y mode (flying dot disbond measurement) and delamination setups.

 
 Reply 
 

Product Spotlight

iProbe - USB Phased Array Probe

Turn your PC, Laptop or Tablet into a powerful 32:64 Phased Array system with our USB powered Phas
...
ed Array iProbe and inspection software package. Perform affordable weld inspection and corrosion mapping inspections with this powerful but small system. The probe has a 100V pulser, 8K PRF, dual axis encoder input and achieves outstanding signal quality.
>

AIS229 - Multipurpose Real Time System

Latest standard & automatic real time system developed by Balteau. The AIS229 has been designed to
...
do series inspection in a wide variety of industry. Composed of a shielded cabinet, 5 axis manipulator, x-ray generator and tubehead from 160kV to 225kV, a fl at panel & much more, the AIS229 is most certainly one of the most multipurpose RTR system available on the market.
>

High-performance Linear Phased Array Probes

Available to order from stock in a range of 5MHz – 7.5MHz and from 16 to 64 elements. Designed w
...
ith piezo-composite elements, Phoenix phased array probes provide high-resolution imaging to maximise sensitivity; accurate ultrasonic detection and sizing of defects in welds; and effective corrosion mapping. Housed in a rugged stainless steel case for on-site industrial NDT applications.
>

UCI Hardness Tester NOVOTEST T-U2

UCI hardness tester NOVOTEST T-U2 is is used for non-destructive hardness testing of: metals and
...
alloys by scales of hardness: Rockwell (HRC), Brinell (HB), Vickers (HV); non-ferrous metals, alloys of iron etc., and using five additional scales for calibration; with tensile strength (Rm) scale determines the tensile strength of carbon steel pearlitic products by automatic recalculation from Brinell (HB) hardness scale.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window