where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
564 views
Job Seeks
S.SHAHULHAMEED
Engineering, WELDING INSPECTOR/ QA.QC ENGINEER
GOVERNMENT POLYTECHNIC ARANTHANGI, India, Joined Jul 2008, 2

S.SHAHULHAMEED

Engineering, WELDING INSPECTOR/ QA.QC ENGINEER
GOVERNMENT POLYTECHNIC ARANTHANGI,
India,
Joined Jul 2008
2
16:04 Jul-24-2009
QA/QC, API510, CSWIP3.1, BGAS PAINTING INSPECTOR

Job Location: ANYWHERE

Having an over all experience of 9 years 2 Months , out of which around 5 years Gulf experience in the field of QA/QC, Inspection, Welding , N.D.T. ,Painting & Documentation for Pressure vessels, Storage Tanks, Static Equipments, Rotary Equipments, Pipelines, PIPING & STRUCTURALS in Fabrication, Projects & shutdowns.
API510 CERTIFICATE NO :35271
CSWIP3.1 CERTIFICATE NO : 30521
BGAS CERTIFICATE NO : 40097
NDT LEVEL II : UT,RT,PT,MT
SEEKING SHORT TERMS, SHUTDOWNS, PROJECTS.
MOBILE : 00919786790012

 
 

Product Spotlight

ISAFE3 Intrinsically Safe Sensor System

ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
...
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
>

Robotic laser shearography enables 100% inspection of complex, flight-critical composite structures

An article in “Composites World Magazine” showcases Non Destructive Testing of aero-structures
...
with Laser Shearography. Over the years Dantec Dynamics has supplied many solutions for the aerospace industry. Referring to specific customer projects several of these cases are examined to outline the advantages of using Laser Shearography for automated defect detection.
>

YXLON Cougar EVO

Scalable small footprint X-ray inspection systems for assembly and laboratory applications. The
...
YXLON Cougar EVO series was designed to provide the "best-in- class" inspection solutions for SMT, semiconductor, and laboratory assembly applications, while maintaining a small system footprint for maximum convenience. With optimized software and hardware, these systems produce higher quality and more consistent results than other electronics inspection systems currently on the market.
>

NDT.net launches mobile-friendly design

NDT.net has revamped its website providing a mobile-friendly design.The front page received a comp
...
letely new design and all other sections are now reacting responsively on mobile devices. This has been a major step to make our website more user- friendly.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window