where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
3716 views
Technical Discussions
aldo
Engineering
Italy, Joined Jan 2009, 39

aldo

Engineering
Italy,
Joined Jan 2009
39
06:34 Jul-31-2009
MPT on cast iron

Is possible to do the MPT on caston iron (magnetic particle testing)? I do this answer because was a question on II level quiz....
I answered that do not possible to do MPT because caston iron is not ferromagnetic material...but correct answer saied that was possible......
I hope your suggestion....
Tanks and best regards...
Aldo

 
 Reply 
 
anjafo
NDT Inspector
Norway, Joined Aug 2009, 204

anjafo

NDT Inspector
Norway,
Joined Aug 2009
204
23:17 Aug-12-2009
Re: MPT on cast iron
In Reply to aldo at 06:34 Jul-31-2009 (Opening).

cast iron is ferromagnetic

stainless steels are not for example

 
 Reply 
 
S.Palanivelu
Engineering, - Steel Valve foundry
India, Joined Mar 2009, 2

S.Palanivelu

Engineering, - Steel Valve foundry
India,
Joined Mar 2009
2
19:52 Oct-22-2009
Re: MPT on cast iron
In Reply to anjafo at 23:17 Aug-12-2009 .

U can do MT testing on Cast iron.. it is ferromaganet material..

 
 Reply 
 
Jim Draper
Consultant, ASNT Level III MT PT RT VT
Draper NDT, USA, Joined Jul 2009, 99

Jim Draper

Consultant, ASNT Level III MT PT RT VT
Draper NDT,
USA,
Joined Jul 2009
99
16:10 Oct-23-2009
Re: MPT on cast iron
In Reply to S.Palanivelu at 19:52 Oct-22-2009 .

Cast iron is ferromagnetic, and some stainless steels are also. The three elements that are ferromagnetic are iron, nickel and cobalt.

 
 Reply 
 
chen zhiqiang
Teacher, - - engineering for
HEBEI UNIVERSITY COLLEGE OF Qlty.&Tech., China, Joined Oct 2009, 5

chen zhiqiang

Teacher, - - engineering for
HEBEI UNIVERSITY COLLEGE OF Qlty.&Tech.,
China,
Joined Oct 2009
5
01:27 Oct-26-2009
Re: MPT on cast iron
In Reply to Jim Draper at 16:10 Oct-23-2009 .

yes ,cast iron is ferromagnetic material and suit for PMI,and ferromagnetic material including iron,nikle,cobalt and relative self alloyed(such as carbon steel,alloyed str.steel etc.) not suitble for nonferrous( such as Al.copper,austain stainless steel).

 
 Reply 
 
Azhar Jamil
NDT Engineer
Panama, Joined May 2006, 17

Azhar Jamil

NDT Engineer
Panama,
Joined May 2006
17
06:55 Oct-26-2009
Re: MPT on cast iron
In Reply to chen zhiqiang at 01:27 Oct-26-2009 .

We can do the MPI of cast iron. If you are not sure about any material that is ferromagnetic or not, just check with a small magnet (or with yoke) prior to inspection .
regards

 
 Reply 
 

Product Spotlight

AIS229 - Multipurpose Real Time System

Latest standard & automatic real time system developed by Balteau. The AIS229 has been designed to
...
do series inspection in a wide variety of industry. Composed of a shielded cabinet, 5 axis manipulator, x-ray generator and tubehead from 160kV to 225kV, a fl at panel & much more, the AIS229 is most certainly one of the most multipurpose RTR system available on the market.
>

ISAFE3 Intrinsically Safe Sensor System

ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
...
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
>

GEKKO, Standard and Advanced phased-array for Easier inspection

M2M Gekko® is a field-proven flaw detector offering PAUT, UT, TOFD and TFM through the streamline
...
d user interface Capture™. Released in 32:128, 64:64 or 64:128 channel configurations, Gekko combines high- resolution and speed while reducing inspectors’ training time.
>

MUSE Mobile Ultrasonic Equipment

The MUSE, a portable ultrasonic imaging system, was developed for in-field inspections of light-weig
...
ht structures. The MUSE consists of a motor-driven manipulator, a water circulation system for the acoustic coupling and a portable ultrasonic flaw detector (USPC 3010). The MUSE provides images of internal defects (A-, B-,C- and D-scan).
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window