where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

ACS-Solutions GmbH
develop and manufacture hi-tech devices for Ultrasonic Testing
823 views
Technical Discussions
Jedispin
Jedispin
06:59 Aug-18-2009
Subsurface crack detection by MT in Martensitic Stainsless Steel

Hi,

I would like to have some information regarding subsurface crack detection by MT in Martensitic Stainsless Steel. I would like to know, what is the maximum depth that we can detect such a crack for martensitic stainless steel.

Do a study has been already done regarding subsurface crack detection on different material.

 
 Reply 
 
Michel Couture
NDT Inspector,
consultant, Canada, Joined Sep 2006, 850

Michel Couture

NDT Inspector,
consultant,
Canada,
Joined Sep 2006
850
03:57 Aug-19-2009
Re: Subsurface crack detection by MT in Martensitic Stainsless Steel
In Reply to Jedispin at 06:59 Aug-18-2009 (Opening).

Hi,

I will answer your question assuming that you are inspecting parts of that material on a regular basis. Maybe you should get a Ketos Ring of a similar material. This way, you will be able to properly verify the sensitivity of your system and will know exactly how deep you can go. The drawing can be found in ASTM E1444.

 
 Reply 
 
John Brunk
Engineering, NDT Level III
Self employed, part-time, USA, Joined Oct 1999, 161

John Brunk

Engineering, NDT Level III
Self employed, part-time,
USA,
Joined Oct 1999
161
06:46 Aug-19-2009
Re: Subsurface crack detection by MT in Martensitic Stainsless Steel
In Reply to Jedispin at 06:59 Aug-18-2009 (Opening).

Martensitic stainless steels, including maraging steel that has not been heat
treated to reform a substantial percentage of austenite, has extremely
limited depth of penetration for very low-frequency eddy current inspection.
Based on this I would be surprised if you could detect subsurface defects with
an electromagnetic yoke. With full-wave rectified current and high amperage
and a Ketos-type ring as Michel suggested, you might find an answer that
pleases you. There are both ferromagnetic and non-ferromagnetic forms of
martensite, but the ferromagnetic form structure often predominates, especially
in maraging steels.

 
 Reply 
 

Product Spotlight

ISONIC 3510

Very Powerful Superior Performance Extremely Portable Smart Phased Array Ultrasonic Flaw Detector an
...
d Recorder with 2 Conventional UT and TOFD Channels uniquely combines PA, single- and multi-channel conventional UT, and TOFD modalities providing 100% raw data recording and imaging. Suitable for all kinds of every-day ultrasonic inspections
>

TESTD-PT SYSTEM

Pulse thermography is a non-contact test method that is ideal for the characterization of thin fil
...
ms and coatings or the detection of defects. With a remarquable short test time and a high detection sensitivity, the Telops TESTD-PT is the perfect tool for non- destructive testing. With such high frame rates, it is even possible to investigate highly conductive or diffusive materials.
>

UCI Hardness Tester NOVOTEST T-U2

UCI hardness tester NOVOTEST T-U2 is is used for non-destructive hardness testing of: metals and
...
alloys by scales of hardness: Rockwell (HRC), Brinell (HB), Vickers (HV); non-ferrous metals, alloys of iron etc., and using five additional scales for calibration; with tensile strength (Rm) scale determines the tensile strength of carbon steel pearlitic products by automatic recalculation from Brinell (HB) hardness scale.
>

Cygnus 6+ PRO Multi-Mode Ultrasonic Thickness Gauge

The Cygnus 6+ PRO thickness gauge is the most advance gauge within the Cygnus range with key featu
...
res including: comprehensive data logging; A-scan and B-scan display; manual gain control; Bluetooth connectivity; and much more. With its unique dual display and three measuring modes (Multiple-Echo, Echo-Echo and Single-Echo), this surface thickness gauge offers maximum versatility for inspections.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window