where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
529 views
Technical Discussions
Hafiz
Hafiz
14:31 Aug-22-2009
spatial resolution

Dear Experts,

I have some queries regarding the ultrasonic resolution. i did some study on ultrasonic transducer. i placed a transmitter & at the other end a receiver probe on the verticle column surface (non-invasive, with couplant) consist of water. my reason is to study/measure the air bubbles velocity released from the bottom of the column.

if my freq is 40kHz, and taking v= 1500m/s (water), from v = f*lamda, the wavelength of the sound is 37.5mm.

so, what is the minimum bubble size could be detected by the receiver probe? is it equivalent to the wavelength? because i did try smaller than the wavelength (25mm) and the receiver probe still gives the response.

thank you

    
 
 Reply 
 
Wieslaw Bicz
Engineering,
PBP Optel sp. z o.o., Poland, Joined Feb 2009, 259

Wieslaw Bicz

Engineering,
PBP Optel sp. z o.o.,
Poland,
Joined Feb 2009
259
19:12 Sep-15-2009
Re: spatial resolution
In Reply to Hafiz at 14:31 Aug-22-2009 (Opening).

The detection of single bubbles has nothing to do with resolution. This would be the case, if you would be interested in differentiation between two bubbles situated close to each other. In you case the question will be: how strong is the signal reflected by the bubble and what is the sensitivity of your probe and electronics. The wave length is not significant in this case. It can be much larger than the bubble size.

    
 
 Reply 
 

Product Spotlight

AIS229 - Multipurpose Real Time System

Latest standard & automatic real time system developed by Balteau. The AIS229 has been designed to
...
do series inspection in a wide variety of industry. Composed of a shielded cabinet, 5 axis manipulator, x-ray generator and tubehead from 160kV to 225kV, a fl at panel & much more, the AIS229 is most certainly one of the most multipurpose RTR system available on the market.
>

Silverwing RMS PA - Phased-array corrosion mapping

Eddyfi Technologies integrated two market leading solutions, Silverwing’s RMS and M2M’s instru
...
ments to provide a high-speed, remote access ultrasonic phased-array inspection system with live total focusing method (TFM).
>

Teletest Focus+

Teletest Focus+ electronics have superior capabilities than rivals on the market. Beyond the usual
...
test features, Focus+ has 24 transmit channels and 24 receive channels, with an additional on-board switching capabilities. The instrument's frequency range is 10–300 kHz.
>

HARDNESS TESTER TKM-459CE combi

TKM-459CE combi applies 2 methods of hardness control: UCI and Leeb. It provides high-accuracy tes
...
ting of metals and alloys as well as items of different sizes and configurations, their hardened layers and galvanic coatings. Device represents results in HB, HRC, HV and others. Shock-, dust- and water-proof housing with intuitive software make this gauge easy to use in all working conditions.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window