where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Sonotron NDT
Original developer and manufacturer of advanced ultrasonic instruments
517 views
Technical Discussions
Vasco Teixeira
R & D, coatings production and inspection, stress analysi
University of Minho - Physics Centre, Portugal, Joined Feb 2000, 3

Vasco Teixeira

R & D, coatings production and inspection, stress analysi
University of Minho - Physics Centre,
Portugal,
Joined Feb 2000
3
08:53 Feb-26-2001
elastic parameters and quality control of PVD thin films

Dear colleagues,

I would like to know (and share some informations)concerning the amount of money involved in industry/ R&D institutes(europe and USA) to :
develop NDT systems for quality inspection of sputtered and physically vacuum deposited thin films for optical, microelectronic and mechanical industry.
and, for speciall systems to control residual stresses and elastic properties of as-deposited thin films and coatings on components in on-line coating production.

Thanks for any help

All the best

Vasco

vasco@fisica.uminho.pt
fax: +351 253 678 981
phone: +351 253 604334/20



 
 Reply 
 
Dr. Patel ND
Dr. Patel ND
01:41 May-02-2001
Re: elastic parameters and quality control of PVD thin films
: Dear colleagues,
.
: I would like to know (and share some informations)concerning the amount of money involved in industry/ R&D institutes(europe and USA) to :
: develop NDT systems for quality inspection of sputtered and physically vacuum deposited thin films for optical, microelectronic and mechanical industry.
: and, for speciall systems to control residual stresses and elastic properties of as-deposited thin films and coatings on components in on-line coating production.
.
: Thanks for any help
.
: All the best
.
: Vasco
.
: vasco@fisica.uminho.pt
: fax: +351 253 678 981
: phone: +351 253 604334/20
.
We are measuring stress in situ on metal and metal alloys and perhaps if you can send us more information on substrate and film thickness and what magnitude of stresses are imposed than we can help you as we have our own ultrasonic system which can measure stresses on thin materials.

Regards

Dr.Patel


 
 Reply 
 
Colin Nicolson
Colin Nicolson
05:34 Jul-04-2001
Re: elastic parameters and quality control of PVD thin films
A good method to control sputtered stress if use a substrate bias. This will tune the amount of gas incorporated into the film. Stress can be changed from tensile to compressive by varying the bias.

Sputter systems are commercially available for this type of applications. Papers and information of potential metals and there properties are hard to come by.

Colin Nicolson.
Process Engineer
Kymata Ltd.



 
 Reply 
 

Product Spotlight

Ultrasonic Testing Immersion Tanks with Unmatched Scanning Features

TecScan’s non-destructive testing Ultrasonic Immersion Tanks & scanners are designed for high pe
...
rformance and demanding NDT testing applications. Our Scan3D™ line of High Precision Immersion Tanks are specifically designed for automated ultrasonic testing of complex composites parts used in aerospace and industrial applications.
>

Eddy Current inspection : RotoETscan Rotating Head

The rotating head RotoETscan detects the presence of longitudinal surface or sub surface defects a
...
t high speed. The rotating head is often installed directly on the production line. It is generally dedicated to the control of long products such as tubes, bars and wires, made of ferrous or non-ferrous material. It can also be used for inspection of small parts (billets).
>

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

FD800 Bench Top Flaw Detectors

The bench-top FD800 flaw detector range combines state-of-the-art flaw detection with advanced mater
...
ial thickness capabilities. Designed for use in the laboratory these gauges are the tool you need for all your flaw detecting needs.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window