where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

628 views
Technical Discussions
fanta diop ndiaye
Engineering, Industry Manager
BUREAU VERITAS DAKAR, Senegal, Joined Feb 2006, 3

fanta diop ndiaye

Engineering, Industry Manager
BUREAU VERITAS DAKAR,
Senegal,
Joined Feb 2006
3
13:27 Aug-26-2009
inspection of welding

we find allways after LPI examination of the welding some cracks in de base material.
we want to know what's happend? If somebody can help.

the base material is steel S 235 jr, the electrodes are E7018, the welding process 111

Any information is appreciated.

 
 Reply 
 
Michał
NDT Inspector, Welding Inspector, Mechanical Inspector on behalf of TPI companies
MIDYTEST, Poland, Joined Aug 2007, 14

Michał

NDT Inspector, Welding Inspector, Mechanical Inspector on behalf of TPI companies
MIDYTEST,
Poland,
Joined Aug 2007
14
21:51 Aug-26-2009
Re: inspection of welding
In Reply to fanta diop ndiaye at 13:27 Aug-26-2009 (Opening).

Probably cracks you have mentioned are hydrogen cracks.
Is it possible that you haven't died electrodes enough?
Remember that you absolutly have to dry alkalic electrodes for 1-2 hours in 300-350 C degree.
But I might be wrong - please give some more details if you can.
Best regards
Mike

 
 Reply 
 

Product Spotlight

Research and Application Development For NDT

Acuren’s Research and Application Development specializes in the development of advanced ultraso
...
nic inspection techniques and systems for challenging inspection applications, with an emphasis on practical solutions which are field deployable. Services include manual and automated ultrasonic inspection system development, inspection technique optimization using laboratory scale studies and ultrasonic modeling (CIVA, BeamTool), preparing technical justification for technique evaluation and qualification (Probability of Detection and sizing accuracy studies), inspection/calibration/analysis procedure preparation to support field deployment of custom techniques, and development of custom imaging algorithms to support challenging inspection applications.
>

OPBOX with standard software is able to do all types of inspections and measurements: flaw detection in welds and materials, scanning of objects, testing composite materials, forged and moulded pieces, many UT inspections, measurements of properties of ma

Typical applications: UT measurements with pulse technique, Measurement of thicknesses also at hig
...
h temperatures, Measurements of properties of materials, including fluids and gases We are delivering a standard version of the software (for any Microsoft Windows up to 10 x64 with Microsoft Hardware certification report Approved) and for special needs: SDK with ready to use examples for LabView, MATLAB x64, C++ wrapper for dll, Python and Linux., and also low-level description of how to control our devices directly from any USB tools
>

Ultrasonic Probe Recharacterization Service

NDT Systems offers a comprehensive Aftercare and Recharacterization Service for all our ultrasonic
...
probes. The Recharacterization Service is fully compliant with International ASTM E1065 Standard Guide (and other applicable standards) and offers complete documentation, traceable to the ASTM E1065 Standard. For more details or to schedule Recharacterization Services contact ndtsales@ndtsystems.com
>

32:128PR PAUT & 2-ch TOFD Flaw Detector: SyncScan 2

●32:128PR PAUT with optional 2-ch TOFD to maximize your efficiency ●Support PR mode for corrosi
...
on inspection ●Multiple solutions for welds & corrosion ●Faster scan speed (Approximately 3 meters/minute) ●Light weight: 4kg only including battery
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window