where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

1207 views
Technical Discussions
Ebrahim Al-Wabary/Saudia Arabia
Ebrahim Al-Wabary/Saudia Arabia
16:04 Sep-12-2009
NDT EQUIPMENT

Gentlemen-----Hi greeting

Please which you recommend to purchase in term of reliabilty,strength,price and accuracy
1. the AGR TD Focus-Scan Phased Array multi channels equipment or Olympos Omniscan Phased Array multi channels equipment?

2. The NDT equipment(except RT equipment) of GE or Olympos or AGR? particularly UT equipment.

Thanks and best regard
Ebrahim Al-Wabary/Saudia Arabia
Mob: +669 504920561
e-mail: wabaryea@Gmail.com

 
 Reply 
 
Roger Duwe
NDT Inspector, API-510, 570, 653
MISTRAS, USA, Joined Jan 2009, 148

Roger Duwe

NDT Inspector, API-510, 570, 653
MISTRAS,
USA,
Joined Jan 2009
148
14:08 Sep-17-2009
Re: NDT EQUIPMENT
In Reply to Ebrahim Al-Wabary/Saudia Arabia at 16:04 Sep-12-2009 (Opening).

For Phased Array, Omniscan is currently the best of the 'field' instruments.

For manual UT, any of Olympus [Panametrics] or GE [Krautkramer] premier instruments the best available. The software for these two manufacturers is quite a bit different, so it is not easy to go from one brand to another. If you need more than one or two instruments, consider buying all of one brand.

To improve the resolution of manual UT, use only the GE [Krautkramer] composite transducers. Nothing else on the market is even close for resolution and sensitivity.

 
 Reply 
 
Sam
Sam
22:29 Sep-19-2009
Re: NDT EQUIPMENT
In Reply to Roger Duwe at 14:08 Sep-17-2009 .

Basically, as far as I know there are three prominet players namely Ominscan from Olympus, TD Scan from AGR and Phasor from GE. I know it is difficult to lean to one over other, and it is like which car is good GM, Chrysler or Ford.
I am too wondering what are other actual user's thoughts on who has used all three systems in terms its slient technical features, its software, ruggeeness and user friendlyness etc., without any bias on one manufacturer or specifically against one manufactuer.
Sam

 
 Reply 
 
Roger Duwe
NDT Inspector, API-510, 570, 653
MISTRAS, USA, Joined Jan 2009, 148

Roger Duwe

NDT Inspector, API-510, 570, 653
MISTRAS,
USA,
Joined Jan 2009
148
03:54 Sep-21-2009
Re: NDT EQUIPMENT
In Reply to Sam at 22:29 Sep-19-2009 .

Sam,
I am just familiar with the Omniscan. However, after seeing demonstrations from multiple NDE companies, using a range of PA equipment, both BP (British Petroleum) and Suncor now specify Omniscan as "prequalified". Any other PA system has to be tested and pass a Performance Demonstration, to their satisfaction. I have to respect those opinions, and have drawn some conclusions from the lack of prequalified alternate systems.

 
 Reply 
 
Joe Buckley
Consultant, ASNT L-III, Honorary Secretary of BINDT
Level X NDT, BINDT, United Kingdom, Joined Oct 1999, 528

Joe Buckley

Consultant, ASNT L-III, Honorary Secretary of BINDT
Level X NDT, BINDT,
United Kingdom,
Joined Oct 1999
528
17:06 Sep-21-2009
Re: NDT EQUIPMENT
In Reply to Roger Duwe at 03:54 Sep-21-2009 .

Hopefully the conclusions you have drawn relate to the resources that Olympus have allocated to promoting the equipment and supporting evaluations, as well as the excellent job done by some of their technical people (Michael Moles in particular has criss-crossed the world showing people how to solve problems with the Omniscan)

I would not criticise the Olympus equipment itself, but neither would I draw any adverse conclusions about the quality of their competitors equipment.

As always, evaluate the equipment for your situation. Availability of training and support from your local rep are at least as important as the reputation of the system

Joe

 
 Reply 
 

Product Spotlight

Ultrasonic Testing Immersion Tanks with Unmatched Scanning Features

TecScan’s non-destructive testing Ultrasonic Immersion Tanks & scanners are designed for high pe
...
rformance and demanding NDT testing applications. Our Scan3D™ line of High Precision Immersion Tanks are specifically designed for automated ultrasonic testing of complex composites parts used in aerospace and industrial applications.
>

CIVA 2020 UT Module

CIVA NDE Simulation Software is the world leader of NDT Simulation. The UT simulation Module incl
...
udes: - "Beam computation": Beam propagation simulation - "Inspection Simulation": Beam interaction with flaws or specimens The user can simulate a whole inspection process (pulse echo, tandem or TOFD) with a wide range of probes (conventional, Phased- arrays or EMAT), components, and flaws.
>

GUL Subsea Solutions - Screeening & Monitoring

To inspect new and existing subsea lines, you need proven technology and experience. GUL offers it's
...
technology to solve this challenge: GUL Subsea and gMAT Transducer Rings.
>

Micro CT

nanoVoxel series has nano-scale resolution upto 500nm by using high voltage X-ray source (from 80-
...
300 kV) with micro/nano focal spot and highly sensitive flat panel detectors and unique Optical coupling detector.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window