where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

1306 views
Technical Discussions
adam
adam
16:50 Sep-18-2009
user functions / instructions for site scan ut set ?

Hi i asked for any info on epoch sets a few weeks ago but its actually site scan sets ill be using . Does anyone have any instructions / used guides for the set as i have had limited experience on the set ?? cheers

 
 Reply 
 
Joe Buckley
Consultant, ASNT L-III, Honorary Secretary of BINDT
Level X NDT, BINDT, United Kingdom, Joined Oct 1999, 528

Joe Buckley

Consultant, ASNT L-III, Honorary Secretary of BINDT
Level X NDT, BINDT,
United Kingdom,
Joined Oct 1999
528
18:26 Sep-18-2009
Re: user functions / instructions for site scan ut set ?
In Reply to adam at 16:50 Sep-18-2009 (Opening).

That is good to hear.

We like to think our sets are easy to use, but a manual is still useful.

Do you know which model number you will be using? The Sitescan name has been used since the Analog days, but most sets out there are now digital ones. Generally the interface on our digital sets has stayed fairly consistent, but you may as well have the right one,

will you be using any particular evaluation functions? AWS/API/DGS etc?

let me know, either directly or via the Forum, and I'll do the best I can to help.

Joe

 
 Reply 
 
adam
adam
18:44 Sep-19-2009
Re: user functions / instructions for site scan ut set ?
In Reply to Joe Buckley at 18:26 Sep-18-2009 .

Hi joe ,

not 100% sure on the actual set ill be using untill i get out there...... straight forward shear wave UT as far as i know so just wanted any info really so i had a slight heads up on the set . More than likely just functions for calibrating probes , setting DAC,s etc ...... should there be anything more challenging then im sure someone on site would be able to help .

 
 Reply 
 
Joe Buckley
Consultant, ASNT L-III, Honorary Secretary of BINDT
Level X NDT, BINDT, United Kingdom, Joined Oct 1999, 528

Joe Buckley

Consultant, ASNT L-III, Honorary Secretary of BINDT
Level X NDT, BINDT,
United Kingdom,
Joined Oct 1999
528
23:02 Sep-19-2009
Re: user functions / instructions for site scan ut set ?
In Reply to adam at 18:44 Sep-19-2009 .

Download 250 Sitescan manual

HI Adam

I've attached manual for the current 250 Sitescan, the 150 is similar, main differences are no narrowband filters, no TCG.

The older 140/240, and the even older metal cased 130/230 have a broadly similar menu structure but a different keypad.

You may also come across 120 or 123 models, these are 'no-frills' units mainly intended for training schools, although they should still be fine for basic weld testing applications.

let me know if there is anything i can do to help.
 
 Reply 
 

Product Spotlight

UCI Hardness Tester NOVOTEST T-U2

UCI hardness tester NOVOTEST T-U2 is is used for non-destructive hardness testing of: metals and
...
alloys by scales of hardness: Rockwell (HRC), Brinell (HB), Vickers (HV); non-ferrous metals, alloys of iron etc., and using five additional scales for calibration; with tensile strength (Rm) scale determines the tensile strength of carbon steel pearlitic products by automatic recalculation from Brinell (HB) hardness scale.
>

OPBOX with standard software is able to do all types of inspections and measurements: flaw detection in welds and materials, scanning of objects, testing composite materials, forged and moulded pieces, many UT inspections, measurements of properties of ma

Typical applications: UT measurements with pulse technique, Measurement of thicknesses also at hig
...
h temperatures, Measurements of properties of materials, including fluids and gases We are delivering a standard version of the software (for any Microsoft Windows up to 10 x64 with Microsoft Hardware certification report Approved) and for special needs: SDK with ready to use examples for LabView, MATLAB x64, C++ wrapper for dll, Python and Linux., and also low-level description of how to control our devices directly from any USB tools
>

HD-CR 35 NDT Computed Radiography System

Portable high-resolution CR scanner for all radiography applications - weld testing, profile images
...
and aerospace. No matter what type of radiographic testing you are performing, the unique TreFoc Technology of the HD-CR 35 NDT imaging plate scanner always guarantees the highest image quality.
>

Research Center IDEKO develops an ultrasonic train wheel inspection system for CAF

The Basque Research centre IK4-IDEKO has developed a state-of-the-art ultrasonic inspection system f
...
or the train wheel. This system secures a sound condition of train wheels and is thus a significant contribution to rail transport safety. The device was delivered to CAF recently and its use allows the manufacturer to become an approved supplier of rolling stock in Italy, as it meets the demanding homologation standards of this country. \\\\r\\\\n
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window