where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

ULTRASOUND INSTITUTE
The Ultrasound Institute can develop new advanced ultrasonic measurement, imaging and NDT techniques for non-conventional applications.

300 views
Job Offers
A Murat
A Murat
17:19 Sep-18-2009
AUT NDT inspector

Posted by NEBEST
Job Location: Nigeria

Project : TOTAL USAN
Tasks
1.Follow-up the construction of UFR and Buoy activities in Nigeria and ensure the contract applies (both project specifications and schedule).
2.Monitor performance of NDE in terms of quality and frequency, ensuring conformity with relevant specifications and codes.
3.Identify the critical activities and bottleneck for the progress of the modules related to welding. Anticipate; propose solutions.
4.Follow up the NDE activities of UFR and Buoy and insure proper records (NDE/inspection records follow-up).
5.Review all NDE reports and interpret all of radiography films in addition to the third party interpretation. Monitor NDE execution like DP, MPI, RT, UT and AUT.
6.Monitoring of NDT subcontractor and Contractor inspectors qualification and performance.
7.Be the focal point with the Project NDT Engineer.
Monitors the implementation of safety procedures and working practices by Contractor. Special follow-up on Gamma/X-Ray.

Skills
Qualification: HND/HNC graduate or Degree qualified – Discipline: Offshore structural, piping and vessel specialist
Professional Experience: 10-15 years experience with Project background within Oil & Gas industry. Construction experience is required on structural, piping and vessel installations.
Experience on construction yard in construction contractor team is required. Experience on West African yards a plus.
Minimum 5 years experience in all aspects of Equipments and practical knowledge of applicable codes and standards such as ISO, API, ASTM and ASME.
Qualification level II on UT, RT and MPI as per EN 473.
Formal training in the time of flight diffraction techniques and automated ultrasonic testing.
Welding knowledge / Certificate would be an added advantage.
An autonomous supervisor with strong skill in Ommiscanner system for Pipe welding Control

Location :Port Harcourt, then offshore
Duration : 18 months min
Status : rotational 4 weeks on x 4 weeks off
Accomodation, food and laundry are provided by the company
All fees in charge of the company



Nebest COT

4 B Rue Aristide Briand

78130 Les Mureaux Yvelines, France

 
 

Product Spotlight

ISONIC 3510

Very Powerful Superior Performance Extremely Portable Smart Phased Array Ultrasonic Flaw Detector an
...
d Recorder with 2 Conventional UT and TOFD Channels uniquely combines PA, single- and multi-channel conventional UT, and TOFD modalities providing 100% raw data recording and imaging. Suitable for all kinds of every-day ultrasonic inspections
>

TESTD-PT SYSTEM

Pulse thermography is a non-contact test method that is ideal for the characterization of thin fil
...
ms and coatings or the detection of defects. With a remarquable short test time and a high detection sensitivity, the Telops TESTD-PT is the perfect tool for non- destructive testing. With such high frame rates, it is even possible to investigate highly conductive or diffusive materials.
>

Research Center IDEKO develops an ultrasonic train wheel inspection system for CAF

The Basque Research centre IK4-IDEKO has developed a state-of-the-art ultrasonic inspection system f
...
or the train wheel. This system secures a sound condition of train wheels and is thus a significant contribution to rail transport safety. The device was delivered to CAF recently and its use allows the manufacturer to become an approved supplier of rolling stock in Italy, as it meets the demanding homologation standards of this country. \\\\r\\\\n
>

Ultrasonic Squirter/Gantry System

TecScan’s NDT Ultrasonic Gantry Systems are industrial Squirter scanners designed for non-destru
...
ctive quality testing and raster scanning of large structures and parts. The Gantry Systems are usually composed of an Industrial Mechanical Scanner and a Control Room with System Workstation.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window