where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

1303 views
Technical Discussions
adam
adam
16:50 Sep-18-2009
user functions / instructions for site scan ut set ?

Hi i asked for any info on epoch sets a few weeks ago but its actually site scan sets ill be using . Does anyone have any instructions / used guides for the set as i have had limited experience on the set ?? cheers

 
 Reply 
 
Joe Buckley
Consultant, ASNT L-III, Honorary Secretary of BINDT
Level X NDT, BINDT, United Kingdom, Joined Oct 1999, 528

Joe Buckley

Consultant, ASNT L-III, Honorary Secretary of BINDT
Level X NDT, BINDT,
United Kingdom,
Joined Oct 1999
528
18:26 Sep-18-2009
Re: user functions / instructions for site scan ut set ?
In Reply to adam at 16:50 Sep-18-2009 (Opening).

That is good to hear.

We like to think our sets are easy to use, but a manual is still useful.

Do you know which model number you will be using? The Sitescan name has been used since the Analog days, but most sets out there are now digital ones. Generally the interface on our digital sets has stayed fairly consistent, but you may as well have the right one,

will you be using any particular evaluation functions? AWS/API/DGS etc?

let me know, either directly or via the Forum, and I'll do the best I can to help.

Joe

 
 Reply 
 
adam
adam
18:44 Sep-19-2009
Re: user functions / instructions for site scan ut set ?
In Reply to Joe Buckley at 18:26 Sep-18-2009 .

Hi joe ,

not 100% sure on the actual set ill be using untill i get out there...... straight forward shear wave UT as far as i know so just wanted any info really so i had a slight heads up on the set . More than likely just functions for calibrating probes , setting DAC,s etc ...... should there be anything more challenging then im sure someone on site would be able to help .

 
 Reply 
 
Joe Buckley
Consultant, ASNT L-III, Honorary Secretary of BINDT
Level X NDT, BINDT, United Kingdom, Joined Oct 1999, 528

Joe Buckley

Consultant, ASNT L-III, Honorary Secretary of BINDT
Level X NDT, BINDT,
United Kingdom,
Joined Oct 1999
528
23:02 Sep-19-2009
Re: user functions / instructions for site scan ut set ?
In Reply to adam at 18:44 Sep-19-2009 .

Download 250 Sitescan manual

HI Adam

I've attached manual for the current 250 Sitescan, the 150 is similar, main differences are no narrowband filters, no TCG.

The older 140/240, and the even older metal cased 130/230 have a broadly similar menu structure but a different keypad.

You may also come across 120 or 123 models, these are 'no-frills' units mainly intended for training schools, although they should still be fine for basic weld testing applications.

let me know if there is anything i can do to help.
 
 Reply 
 

Product Spotlight

FD800 Bench Top Flaw Detectors

The bench-top FD800 flaw detector range combines state-of-the-art flaw detection with advanced mater
...
ial thickness capabilities. Designed for use in the laboratory these gauges are the tool you need for all your flaw detecting needs.
>

Ultrasonic Probe Recharacterization Service

NDT Systems offers a comprehensive Aftercare and Recharacterization Service for all our ultrasonic
...
probes. The Recharacterization Service is fully compliant with International ASTM E1065 Standard Guide (and other applicable standards) and offers complete documentation, traceable to the ASTM E1065 Standard. For more details or to schedule Recharacterization Services contact ndtsales@ndtsystems.com
>

32:128PR PAUT & 2-ch TOFD Flaw Detector: SyncScan 2

●32:128PR PAUT with optional 2-ch TOFD to maximize your efficiency ●Support PR mode for corrosi
...
on inspection ●Multiple solutions for welds & corrosion ●Faster scan speed (Approximately 3 meters/minute) ●Light weight: 4kg only including battery
>

CIVA 2020 UT Module

CIVA NDE Simulation Software is the world leader of NDT Simulation. The UT simulation Module incl
...
udes: - "Beam computation": Beam propagation simulation - "Inspection Simulation": Beam interaction with flaws or specimens The user can simulate a whole inspection process (pulse echo, tandem or TOFD) with a wide range of probes (conventional, Phased- arrays or EMAT), components, and flaws.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window