where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

1201 views
Technical Discussions
Ebrahim Al-Wabary/Saudia Arabia
Ebrahim Al-Wabary/Saudia Arabia
16:04 Sep-12-2009
NDT EQUIPMENT

Gentlemen-----Hi greeting

Please which you recommend to purchase in term of reliabilty,strength,price and accuracy
1. the AGR TD Focus-Scan Phased Array multi channels equipment or Olympos Omniscan Phased Array multi channels equipment?

2. The NDT equipment(except RT equipment) of GE or Olympos or AGR? particularly UT equipment.

Thanks and best regard
Ebrahim Al-Wabary/Saudia Arabia
Mob: +669 504920561
e-mail: wabaryea@Gmail.com

 
 Reply 
 
Roger Duwe
NDT Inspector, API-510, 570, 653
MISTRAS, USA, Joined Jan 2009, 148

Roger Duwe

NDT Inspector, API-510, 570, 653
MISTRAS,
USA,
Joined Jan 2009
148
14:08 Sep-17-2009
Re: NDT EQUIPMENT
In Reply to Ebrahim Al-Wabary/Saudia Arabia at 16:04 Sep-12-2009 (Opening).

For Phased Array, Omniscan is currently the best of the 'field' instruments.

For manual UT, any of Olympus [Panametrics] or GE [Krautkramer] premier instruments the best available. The software for these two manufacturers is quite a bit different, so it is not easy to go from one brand to another. If you need more than one or two instruments, consider buying all of one brand.

To improve the resolution of manual UT, use only the GE [Krautkramer] composite transducers. Nothing else on the market is even close for resolution and sensitivity.

 
 Reply 
 
Sam
Sam
22:29 Sep-19-2009
Re: NDT EQUIPMENT
In Reply to Roger Duwe at 14:08 Sep-17-2009 .

Basically, as far as I know there are three prominet players namely Ominscan from Olympus, TD Scan from AGR and Phasor from GE. I know it is difficult to lean to one over other, and it is like which car is good GM, Chrysler or Ford.
I am too wondering what are other actual user's thoughts on who has used all three systems in terms its slient technical features, its software, ruggeeness and user friendlyness etc., without any bias on one manufacturer or specifically against one manufactuer.
Sam

 
 Reply 
 
Roger Duwe
NDT Inspector, API-510, 570, 653
MISTRAS, USA, Joined Jan 2009, 148

Roger Duwe

NDT Inspector, API-510, 570, 653
MISTRAS,
USA,
Joined Jan 2009
148
03:54 Sep-21-2009
Re: NDT EQUIPMENT
In Reply to Sam at 22:29 Sep-19-2009 .

Sam,
I am just familiar with the Omniscan. However, after seeing demonstrations from multiple NDE companies, using a range of PA equipment, both BP (British Petroleum) and Suncor now specify Omniscan as "prequalified". Any other PA system has to be tested and pass a Performance Demonstration, to their satisfaction. I have to respect those opinions, and have drawn some conclusions from the lack of prequalified alternate systems.

 
 Reply 
 
Joe Buckley
Consultant, ASNT L-III, Honorary Secretary of BINDT
Level X NDT, BINDT, United Kingdom, Joined Oct 1999, 528

Joe Buckley

Consultant, ASNT L-III, Honorary Secretary of BINDT
Level X NDT, BINDT,
United Kingdom,
Joined Oct 1999
528
17:06 Sep-21-2009
Re: NDT EQUIPMENT
In Reply to Roger Duwe at 03:54 Sep-21-2009 .

Hopefully the conclusions you have drawn relate to the resources that Olympus have allocated to promoting the equipment and supporting evaluations, as well as the excellent job done by some of their technical people (Michael Moles in particular has criss-crossed the world showing people how to solve problems with the Omniscan)

I would not criticise the Olympus equipment itself, but neither would I draw any adverse conclusions about the quality of their competitors equipment.

As always, evaluate the equipment for your situation. Availability of training and support from your local rep are at least as important as the reputation of the system

Joe

 
 Reply 
 

Product Spotlight

32:128PR PAUT & 2-ch TOFD Flaw Detector: SyncScan 2

●32:128PR PAUT with optional 2-ch TOFD to maximize your efficiency ●Support PR mode for corrosi
...
on inspection ●Multiple solutions for welds & corrosion ●Faster scan speed (Approximately 3 meters/minute) ●Light weight: 4kg only including battery
>

Extended Range Variable Wall® Piping Calibration Blocks for Longseam Inspection

This set of two blocks has been specially designed for situations where ultrasonic examination tak
...
es place circumferentially or “around the curve” for applications such as inspection of longseam welds in piping and vessels. Jointly designed by PH Tool and Holloway NDT, the blocks feature side-drilled hole reflectors positioned within novel compound-curves, each with multiple thickness steps. The unique design results in a light and compact form factor, with the largest block weighing just over 15 lbs and spanning just 16 ¾”. Coverage is provided for nominal pipe sizes from 6” to 10” in the small block and 12” to a whopping 56” in the large block. The compound OD curves and multiple wall thicknesses actually exceed ASME requirements, providing exceptional signal response and measurement accuracy. Properly managing beam divergence off the ID and stabilizing beam skew due to probe rocking is essential to maintaining a consistent calibration when inspecting lengthwise on curved surfaces.
>

Combination of Digital Image Correlation and Thermographic Measurements

The combination of measuring results from the digital image correlation (ARAMIS, DIC) and temperat
...
ure measuring data from infrared cameras permits the simultaneous analysis of the thermal and mechanical behavior of test specimens in the materials and components testing field.
>

Compact NDT inspection-heads for measurements with active thermography

The compact inspection head is suitable for thermographic ndt tasks. The uncooled infrared camera
...
is specially developed for NDI-tasks and offers a thermal sensitivity until now known only from thermal imagers with cooled detector. All required components and functions are integrated into the inspection-head. You will only need an ethernet cable to connect the sensor with the evaluation system.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window