where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
221 views
Job Seeks
Ganesh.N
Ganesh.N
10:19 Oct-03-2009
QHSE Maagement system auditor & Consultant

Job Location: Worldwide, USA, Europe, Germany, Middle East.

14 years of experience in QHSE activities
 Providing consultancy and training services for companies in Public & Private sector to meet the ISO 9001:2008, ISO14001: 2004 & OHSAS 18001:2007 international standards. Main activities include: Conducting Gap Analyses & training:
- Introduction to the Health, Safety, Environment & Quality Management Systems
- Introduction to the Environmental Aspects & Impacts for all management levels
- HSE Management of Contractors
- Training of the Documentation Teams
- Internal Quality System Auditing
 Preparation of management systems & project specific documentation/plans - design and documentation for both manufacturing and services companies involving development of manuals, objectives, process maps, procedures, work instructions, and formats in accordance with the requirements of ISO 9001:2008, ISO14001: 2004 & OHSAS 18001:2007 international standards.

 Systems Implementation Guidance and Auditing.

- Conducting QHSE audit as per International and BV standard within UAE & certifying critical operation as a third party.
- Developing QHSE plan and procedure as per ISO 9001 , ISO 14000 , OSHAS 18001 standards and local laws ( Municipality and Federal laws) for different clients and conducting various audits .
- Carry out Risk Assessment hazard analysis for different activities and formulation and reviewing procedures and work methods.

 
 

Product Spotlight

UCI Hardness Tester NOVOTEST T-U2

UCI hardness tester NOVOTEST T-U2 is is used for non-destructive hardness testing of: metals and
...
alloys by scales of hardness: Rockwell (HRC), Brinell (HB), Vickers (HV); non-ferrous metals, alloys of iron etc., and using five additional scales for calibration; with tensile strength (Rm) scale determines the tensile strength of carbon steel pearlitic products by automatic recalculation from Brinell (HB) hardness scale.
>

NDTkit RT

NDTkit RT, TESTIA's Digital Radiography software The NDTkit product line software for X-ray analysi
...
s. NDTkit RT is a software benefiting from the Ultis kernel which is dedicated to radiographic image analysis. It offers a set of tools and filtering processes to assist RT operators in finding relevant flaws.
>

IRIS 9000Plus - Introducing the next generation of heat exchanger inspection.

Representing the seventh generation of the IRIS system, the IRIS 9000 Plus has nearly 200 years of c
...
ombined field inspection experience incorporated in its design. This experience combined with a strong commitment to quality and a history of innovation has made Iris Inspection Services® the undisputed leader in IRIS technology.
>

GEKKO, Standard and Advanced phased-array for Easier inspection

M2M Gekko® is a field-proven flaw detector offering PAUT, UT, TOFD and TFM through the streamline
...
d user interface Capture™. Released in 32:128, 64:64 or 64:128 channel configurations, Gekko combines high- resolution and speed while reducing inspectors’ training time.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window