where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

1328 views
Career Discussions
Nico Costermans
Nico Costermans
11:05 Oct-08-2009
Payment rate for NDT / Rope Acces in Netherlands and Belgium

Hey guys,

I am sort or les a beginner in NDT / Rope Access with UT2 3.1 3.2, MT2, PT2, IRATA level 1 and also offshore certificates.
Butt only once in a while offshore on the job that is planned.
Company called me that I can start but they asked me what I want to earn. So they can calculate if it is possible or not.

This is why I want to ask you guys if anybody can tell me from arround Netherlands or Belgium what I kinda need to ask as payment rate?
Ps: need to kn,ow this better fast then late. Company asked for this week.

Thanks so much,

Nico Costermans

Verdienste voor NDT / Ropa access in Nederland en Belgie

Hey de mannen,

Ik ben redelijk nieuw in NDT / Rope Access met UT2 3.1 3.2, MT2, PT2, IRATA level 1 en ook offshore certidicaten. Af en toe zal er hier dan ook offshore werk op de nieuwe geplande job aan te pas komen.

Een bedriijf belde me gister met de vraag wat ik wil verdienen. Zodat ze kunnen berekenen of het voor hen lukt.
Daarom zou ik jullie willen vragen welk bedrag ik nu zou moeten zeggen voor de verdienste in Nederland en of Belgie?

Alvast super veel dank,

Nico Costermans

 
 Reply 
 
Godfrey Hands
Consultant,
PRI Nadcap, United Kingdom, Joined Nov 1998, 307

Godfrey Hands

Consultant,
PRI Nadcap,
United Kingdom,
Joined Nov 1998
307
11:46 Oct-08-2009
Re: Payment rate for NDT / Rope Acces in Netherlands and Belgium
In Reply to Nico Costermans at 11:05 Oct-08-2009 (Opening).

Nico,
It depends on if this is a full time position or if it is on an ad-hoc basis, and if ad-hoc, then how much work per week/month there will be on average.
You also have to take care that the company is large enough and makes payments regularly enough that you don't have problems surviving whist waiting for payments.
A direct contractor generally has more problems getting money than a contractor that works through an agency.

Regards,
Godfrey

Nico,
Het hangt eraf hoeveel werk deze bedrijf je aanbiedt. Is het een permanent baan of alleen een af-en-toe? Als het af-en-toe is, dan hoeveel werk gemiddeld per week/maand zou het zijn.
Je moet ook opletten dat de bedrijf een goed betaaler is en dat je geen probleem krijgt met je loon. Een direkt contractor heeft meer problemen met betaalingen als een contractor die door een agency gaat.
Groeten,
Godfrey

 
 Reply 
 
Nico Costermans
Nico Costermans
12:23 Oct-08-2009
Re: Payment rate for NDT / Rope Acces in Netherlands and Belgium
In Reply to Godfrey Hands at 11:46 Oct-08-2009 .

Hello Godfrey,

Should it be possible to give me +- some amounts?

Just that for now I don't have a clue what to ask.
And will ask if it is on permanent or ad-hoc.
Do you mean on freelance basis with ad-hoc?

Many thanks,

Nico

Hey Godfrey,

Zou het eventueel mogelijkjzijn om er een aantal bedragen op te kleven?
Gewoon omdat ik echt niet weet wat ik zou moeten vragen.
Zal dan ook eens te weten moeten komen of het permanent is of af-en-toe.
Bedoel je met deze af en toe dan op freelance-zelfstandige basis?

Heel veel dank,

Nico

 
 Reply 
 

Product Spotlight

Immersion systems

ScanMaster ultrasonic immersion systems are designed for high throughput, multi shift operation in a
...
n industrial or lab environment. These fully integrated systems provide various scanning configurations and incorporate conventional and phased arrays technologies to support diverse applications, such as inspection of disks, bars, shafts, billets and plates. All of ScanMaster immersion systems are built from high accuracy scanning frames allowing for scanning of complex parts and include a multi-channel ultrasonic instrument with exceptional performance. The systems are approved by all major manufacturers for C-scan inspection of jet engine forged discs. Together with a comprehensive set of software modules these flexible series of systems provide the customer with the best price performance solutions.
>

Scatter Correction for Industrial Cone-Beam Computed Tomography (CBCT)

Download our white paper on Scatter Correction for Industrial Cone-Beam Computed Tomography (CBCT)
...
Using 3D VSHARP, a fast GPU-Based Linear Boltzmann Transport Equation Solver here: http://bit.ly/2Y0t78P
>

A1525 SOLO

A1525 Solo – the most compact and affordable TMF unit with two phased array transducers and 3D v
...
isualization and analysis software in standard delivery set. A compact, ergonomic and easy to handheld Phased Array unit based on Total Focusing Method for easy-going imaging of inspection objects with two-dimensional and three-dimensional visualization and evaluation of inspection results.
>

Extended Range Variable Wall® Piping Calibration Blocks for Longseam Inspection

This set of two blocks has been specially designed for situations where ultrasonic examination tak
...
es place circumferentially or “around the curve” for applications such as inspection of longseam welds in piping and vessels. Jointly designed by PH Tool and Holloway NDT, the blocks feature side-drilled hole reflectors positioned within novel compound-curves, each with multiple thickness steps. The unique design results in a light and compact form factor, with the largest block weighing just over 15 lbs and spanning just 16 ¾”. Coverage is provided for nominal pipe sizes from 6” to 10” in the small block and 12” to a whopping 56” in the large block. The compound OD curves and multiple wall thicknesses actually exceed ASME requirements, providing exceptional signal response and measurement accuracy. Properly managing beam divergence off the ID and stabilizing beam skew due to probe rocking is essential to maintaining a consistent calibration when inspecting lengthwise on curved surfaces.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window