where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
1244 views
Career Discussions
Nico Costermans
Nico Costermans
11:05 Oct-08-2009
Payment rate for NDT / Rope Acces in Netherlands and Belgium

Hey guys,

I am sort or les a beginner in NDT / Rope Access with UT2 3.1 3.2, MT2, PT2, IRATA level 1 and also offshore certificates.
Butt only once in a while offshore on the job that is planned.
Company called me that I can start but they asked me what I want to earn. So they can calculate if it is possible or not.

This is why I want to ask you guys if anybody can tell me from arround Netherlands or Belgium what I kinda need to ask as payment rate?
Ps: need to kn,ow this better fast then late. Company asked for this week.

Thanks so much,

Nico Costermans

Verdienste voor NDT / Ropa access in Nederland en Belgie

Hey de mannen,

Ik ben redelijk nieuw in NDT / Rope Access met UT2 3.1 3.2, MT2, PT2, IRATA level 1 en ook offshore certidicaten. Af en toe zal er hier dan ook offshore werk op de nieuwe geplande job aan te pas komen.

Een bedriijf belde me gister met de vraag wat ik wil verdienen. Zodat ze kunnen berekenen of het voor hen lukt.
Daarom zou ik jullie willen vragen welk bedrag ik nu zou moeten zeggen voor de verdienste in Nederland en of Belgie?

Alvast super veel dank,

Nico Costermans

 
 Reply 
 
Godfrey Hands
Consultant,
PRI Nadcap, United Kingdom, Joined Nov 1998, 304

Godfrey Hands

Consultant,
PRI Nadcap,
United Kingdom,
Joined Nov 1998
304
11:46 Oct-08-2009
Re: Payment rate for NDT / Rope Acces in Netherlands and Belgium
In Reply to Nico Costermans at 11:05 Oct-08-2009 (Opening).

Nico,
It depends on if this is a full time position or if it is on an ad-hoc basis, and if ad-hoc, then how much work per week/month there will be on average.
You also have to take care that the company is large enough and makes payments regularly enough that you don't have problems surviving whist waiting for payments.
A direct contractor generally has more problems getting money than a contractor that works through an agency.

Regards,
Godfrey

Nico,
Het hangt eraf hoeveel werk deze bedrijf je aanbiedt. Is het een permanent baan of alleen een af-en-toe? Als het af-en-toe is, dan hoeveel werk gemiddeld per week/maand zou het zijn.
Je moet ook opletten dat de bedrijf een goed betaaler is en dat je geen probleem krijgt met je loon. Een direkt contractor heeft meer problemen met betaalingen als een contractor die door een agency gaat.
Groeten,
Godfrey

 
 Reply 
 
Nico Costermans
Nico Costermans
12:23 Oct-08-2009
Re: Payment rate for NDT / Rope Acces in Netherlands and Belgium
In Reply to Godfrey Hands at 11:46 Oct-08-2009 .

Hello Godfrey,

Should it be possible to give me +- some amounts?

Just that for now I don't have a clue what to ask.
And will ask if it is on permanent or ad-hoc.
Do you mean on freelance basis with ad-hoc?

Many thanks,

Nico

Hey Godfrey,

Zou het eventueel mogelijkjzijn om er een aantal bedragen op te kleven?
Gewoon omdat ik echt niet weet wat ik zou moeten vragen.
Zal dan ook eens te weten moeten komen of het permanent is of af-en-toe.
Bedoel je met deze af en toe dan op freelance-zelfstandige basis?

Heel veel dank,

Nico

 
 Reply 
 

Product Spotlight

Echomac® Small

Available with up to eight channels of electronics to detect and evaluate thickness, flaws and eccen
...
tricity, this UT tester is housed in a convenient, smaller cabinet. This instrument can be used in conjunction with bubbler or immersion tank systems, or with a test bench or in laboratory applications. The Echomac® Small is available in the FD4, FD6 or FD6A versions.
>

Aerospace Systems - Automated Ultrasonic Inspection

USL are specialists in the design and manufacture of turnkey ultrasonic inspection systems for aer
...
ospace applications. From monolithic composites to complex honeycomb structures. This video shows just a few examples of what is possible, find out more at: www.ultrasonic-sciences.co.uk
>

MIZ®-21C: Truly Affordable Eddy Current Handheld with Surface Array Capability

Introducing MIZ-21C, the first truly affordable handheld eddy current instrument with surface array
...
capabilities. MIZ-21C can deliver fast, accurate inspections in demanding NDT applications including aerospace, oil and gas, manufacturing, and power generation. The surface array solution can reduce inspection time by up to 95% compared to traditional handheld pencil probes. The ergonomic design, long battery life, and intuitive touchscreen mean you can inspect more areas faster than ever without fatigue.
>

Lyft™: Pulsed Eddy Current Reinvented

PEC Reinvented—CUI Programs Redefined Corrosion under insulation (CUI) is possibly the greatest u
...
nresolved asset integrity problem in the industry. Current methods for measuring wall thickness with liftoff, without removing insulation, all have severe limitations. Eddyfi introduces Lyft — a reinvented, high-performance pulsed eddy current (PEC) solution. The patent- pending system features a state-of-the-art portable instrument, real- time C-scan imaging, fast data acquisition with grid-mapping and dynamic scanning modes, and flexibility with long cables. It can also scan through thick metal and insulation, as well as aluminum, stainless steel, and galvanized steel weather jackets. Who else but Eddyfi to reinvent an eddy current technique and redefine CUI programs. Got Lyft?
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window