where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
553 views
Technical Discussions
Mehdi Eskandarzade
Mehdi Eskandarzade
00:46 Oct-09-2009
Spiral coil in EMATs

Hello,

I am doing a research in my university. At a mean time I need to do simulation of 3D spiral coil in an EMAT system. Could you please provide me the typical dimensions of common Spiral coils that are used in an EMAT system?

Best Thanks,

 
 Reply 
 
Syed Ali
R & D,
Innerspec Technology, USA, Joined Oct 2009, 17

Syed Ali

R & D,
Innerspec Technology,
USA,
Joined Oct 2009
17
06:11 Oct-11-2009
Re: Spiral coil in EMATs
In Reply to Mehdi Eskandarzade at 00:46 Oct-09-2009 (Opening).

Please refer to Innerspec Technologies for all your emat needs. You can download our product/probe catalog which can provide you answers to most of your questions. Feel free to contact us for any further questions.

Size of spiral depends upon your application. For deeper penetration you may need a larger coil (maybe 0.75 to 1.0" diameter), for other applications a smaller coil would also work equally good.

Regards
Syed Ali

 
 Reply 
 

Product Spotlight

OmniScan™ X3 flaw detector

The OmniScan X3 flaw detector is a complete phased array toolbox. Powerful tools, like total focus
...
ing method (TFM) images and advanced visualization capabilities, enable you to complete your inspection with greater confidence.
>

FAAST-PA! OEM Patented phased Array for high speed UT inspection

Multiangle, Multifocus, Multifrequency, Multibeam. Instead of stacking UT electronics and having m
...
any PA probes, FAAST-PA is able to transmit all delay laws within ONE single shot in Real time.
>

Robotic laser shearography enables 100% inspection of complex, flight-critical composite structures

An article in “Composites World Magazine” showcases Non Destructive Testing of aero-structures
...
with Laser Shearography. Over the years Dantec Dynamics has supplied many solutions for the aerospace industry. Referring to specific customer projects several of these cases are examined to outline the advantages of using Laser Shearography for automated defect detection.
>

FD800 Bench Top Flaw Detectors

The bench-top FD800 flaw detector range combines state-of-the-art flaw detection with advanced mater
...
ial thickness capabilities. Designed for use in the laboratory these gauges are the tool you need for all your flaw detecting needs.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window