where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
881 views
Technical Discussions
Nader A.Rahim
NDT Inspector
Gulf petrochmical ind. co., Bahrain, Joined Jul 2001, 3

Nader A.Rahim

NDT Inspector
Gulf petrochmical ind. co.,
Bahrain,
Joined Jul 2001
3
02:57 Jul-15-2001
cold insulation inspection

I am looking for the best method to inspect ice formation under Ammonia tanks ( double wall). the insulation is PUF with aluminum cladding ( the insulation is approx. 4" )

We been experminating with thermography but we can not establish a solid fact if ice is there or not




 
 Reply 
 
van Cuyck
Director
A2MS, Applied Acoustics, Materials and Systems, France, Joined Nov 1998, 13

van Cuyck

Director
A2MS, Applied Acoustics, Materials and Systems,
France,
Joined Nov 1998
13
09:39 Jul-16-2001
Re: cold insulation inspection
: I am looking for the best method to inspect ice formation under Ammonia tanks ( double wall). the insulation is PUF with aluminum cladding ( the insulation is approx. 4" )
.
: We been experminating with thermography but we can not establish a solid fact if ice is there or not
.


Can you send me a mare detailled description of your system. (configuration, equipements ...)




 
 Reply 
 
John O'Brien
Consultant, -
Chevron ETC , USA, Joined Jan 2000, 280

John O'Brien

Consultant, -
Chevron ETC ,
USA,
Joined Jan 2000
280
09:11 Jul-16-2001
Re: cold insulation inspection
You may not be able to be definitive about ice build up using Thermography. Breakdowns in insulation which you could then extrapolate as being a source of icing should be detectable. Be careful that outer aluminium cladding is not heating up and masking differences. We often used to do the Thermography just after the sun went down.

Other possible approach is something like Neutron Backscatter - but access will be the problem you will probably have to work off cherry pickers.

Best methodology may be to build a mock up of the arrangement and test your technique qith Thermography. Introduce ice and see how fine your settings have to be to maintain discriminations.


 
 Reply 
 

Product Spotlight

CIVA 2020 UT Module

CIVA NDE Simulation Software is the world leader of NDT Simulation. The UT simulation Module incl
...
udes: - "Beam computation": Beam propagation simulation - "Inspection Simulation": Beam interaction with flaws or specimens The user can simulate a whole inspection process (pulse echo, tandem or TOFD) with a wide range of probes (conventional, Phased- arrays or EMAT), components, and flaws.
>

NOVO Armor 15 & NOVO Armor 22

The Armor Kit Contains the NOVO Armor, which provides additional mechanical protection to the NOVO 1
...
5WN & NOVO 22WN Detectors, the Armor Stand and a traveling soft cover. - Newest shock absorbent technology case - Water resistant design - Supports wired & wireless communication - Multiple positioning options - Tripod connection using the Built-in 1/4” threads - Simple Detector battery replacement
>

Teletest Focus+

Teletest Focus+ electronics have superior capabilities than rivals on the market. Beyond the usual
...
test features, Focus+ has 24 transmit channels and 24 receive channels, with an additional on-board switching capabilities. The instrument's frequency range is 10–300 kHz.
>

IRIS 9000Plus - Introducing the next generation of heat exchanger inspection.

Representing the seventh generation of the IRIS system, the IRIS 9000 Plus has nearly 200 years of c
...
ombined field inspection experience incorporated in its design. This experience combined with a strong commitment to quality and a history of innovation has made Iris Inspection Services® the undisputed leader in IRIS technology.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window