where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

EKOSCAN
EKOSCAN is a French manufacturer specialized in equipment for ultrasonic Non-Destructive Testing.EKOSCAN is always breaking new ground in order ...
3715 views
Technical Discussions
aldo
Engineering
Italy, Joined Jan 2009, 39

aldo

Engineering
Italy,
Joined Jan 2009
39
06:34 Jul-31-2009
MPT on cast iron

Is possible to do the MPT on caston iron (magnetic particle testing)? I do this answer because was a question on II level quiz....
I answered that do not possible to do MPT because caston iron is not ferromagnetic material...but correct answer saied that was possible......
I hope your suggestion....
Tanks and best regards...
Aldo

 
 Reply 
 
anjafo
NDT Inspector
Norway, Joined Aug 2009, 204

anjafo

NDT Inspector
Norway,
Joined Aug 2009
204
23:17 Aug-12-2009
Re: MPT on cast iron
In Reply to aldo at 06:34 Jul-31-2009 (Opening).

cast iron is ferromagnetic

stainless steels are not for example

 
 Reply 
 
S.Palanivelu
Engineering, - Steel Valve foundry
India, Joined Mar 2009, 2

S.Palanivelu

Engineering, - Steel Valve foundry
India,
Joined Mar 2009
2
19:52 Oct-22-2009
Re: MPT on cast iron
In Reply to anjafo at 23:17 Aug-12-2009 .

U can do MT testing on Cast iron.. it is ferromaganet material..

 
 Reply 
 
Jim Draper
Consultant, ASNT Level III MT PT RT VT
Draper NDT, USA, Joined Jul 2009, 99

Jim Draper

Consultant, ASNT Level III MT PT RT VT
Draper NDT,
USA,
Joined Jul 2009
99
16:10 Oct-23-2009
Re: MPT on cast iron
In Reply to S.Palanivelu at 19:52 Oct-22-2009 .

Cast iron is ferromagnetic, and some stainless steels are also. The three elements that are ferromagnetic are iron, nickel and cobalt.

 
 Reply 
 
chen zhiqiang
Teacher, - - engineering for
HEBEI UNIVERSITY COLLEGE OF Qlty.&Tech., China, Joined Oct 2009, 5

chen zhiqiang

Teacher, - - engineering for
HEBEI UNIVERSITY COLLEGE OF Qlty.&Tech.,
China,
Joined Oct 2009
5
01:27 Oct-26-2009
Re: MPT on cast iron
In Reply to Jim Draper at 16:10 Oct-23-2009 .

yes ,cast iron is ferromagnetic material and suit for PMI,and ferromagnetic material including iron,nikle,cobalt and relative self alloyed(such as carbon steel,alloyed str.steel etc.) not suitble for nonferrous( such as Al.copper,austain stainless steel).

 
 Reply 
 
Azhar Jamil
NDT Engineer
Panama, Joined May 2006, 17

Azhar Jamil

NDT Engineer
Panama,
Joined May 2006
17
06:55 Oct-26-2009
Re: MPT on cast iron
In Reply to chen zhiqiang at 01:27 Oct-26-2009 .

We can do the MPI of cast iron. If you are not sure about any material that is ferromagnetic or not, just check with a small magnet (or with yoke) prior to inspection .
regards

 
 Reply 
 

Product Spotlight

Customized Probes and Transducers

With a strong development department and our own piezocomposite production, we accompany you from th
...
e first product idea to serial production. Our scientists are continuously researching new methods in the field of ultrasonic measurement technology. The progress achieved enables us to offer you optimal solutions.
>

YXLON Cougar EVO

Scalable small footprint X-ray inspection systems for assembly and laboratory applications. The
...
YXLON Cougar EVO series was designed to provide the "best-in- class" inspection solutions for SMT, semiconductor, and laboratory assembly applications, while maintaining a small system footprint for maximum convenience. With optimized software and hardware, these systems produce higher quality and more consistent results than other electronics inspection systems currently on the market.
>

Varex Imaging Large Field of View (FOV) Digital Detector Arrays (DDAs)

A larger FOV DDA can reduce the space and volume of the X-ray inspection system on the factory floor
...
, enable faster scanning times, better throughput and better resolution images at a lower dose. Customers can also save time and money. With these benefits in mind, Varex Imaging has designed a family of large FOV detectors (4343HE, XRD 1611, 4343DX-I, 4343CT) for our industrial imaging customers.
>

Robotic laser shearography enables 100% inspection of complex, flight-critical composite structures

An article in “Composites World Magazine” showcases Non Destructive Testing of aero-structures
...
with Laser Shearography. Over the years Dantec Dynamics has supplied many solutions for the aerospace industry. Referring to specific customer projects several of these cases are examined to outline the advantages of using Laser Shearography for automated defect detection.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window