where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
625 views
Technical Discussions
David Bunch
David Bunch
11:48 Oct-30-2009
ASME Basic Blocks for UT calibration

I'm looking to get some ASME basic blocks created at a local machine shop. However, I've noticed that every basic block I've used is slightly different. Some are longer than the minimum requirements, some have radiused notches instead of square, small things like that. I'm sure there are reasons for this. Rather than go through the trial and error process of that myself (oh man, I wish I would have gotten this block two inches longer...etc), does anyone here know where I can get some actual mechanical drawings of ASME blocks that have been tweaked for optimal performance?

Thanks
Dave

 
 Reply 
 
Phil Herman
Sales, - Manufacture of NDT Reference Standards/Test Blocks
PH Tool Reference Standards, USA, Joined Oct 1999, 79

Phil Herman

Sales, - Manufacture of NDT Reference Standards/Test Blocks
PH Tool Reference Standards,
USA,
Joined Oct 1999
79
19:38 Oct-30-2009
Re: ASME Basic Blocks for UT calibration
In Reply to David Bunch at 11:48 Oct-30-2009 (Opening).

Dave,
You are correct that there are a few variations of the "standard" theme for ASME basic cal blocks. This is probably due to the expertise level of the particular shops performing the work. Good shops who understand NDT will ask the right questions before manufacturing the blocks. Are the blocks going to be used for PA UT? What specific alloy is being inspected? What angle(s) will be used? The official manufacturing guidance appears in a figure in Section V Article 4, but there is no true mechanical drawing for specific thicknesses or the aforementioned "tweaks." While I am unable to share our shop drawings with you, I'd be happy to make some nice calibration blocks for you should you decide to outsource them.
Phil Herman
PH Tool Reference Standards
267-203-1600

 
 Reply 
 

Product Spotlight

Ultrasonic Probe Recharacterization Service

NDT Systems offers a comprehensive Aftercare and Recharacterization Service for all our ultrasonic
...
probes. The Recharacterization Service is fully compliant with International ASTM E1065 Standard Guide (and other applicable standards) and offers complete documentation, traceable to the ASTM E1065 Standard. For more details or to schedule Recharacterization Services contact ndtsales@ndtsystems.com
>

New PHAsis module for longitudinal weld seam inspection

PHAsis® Phased Array manual ultrasonic spot weld inspection device is now ideally suited for test
...
ing of longitudinally welded seams (e.g. Arplas® seam, short line seams) with a length of 3 to 12 mm.
>

Customized Probes and Transducers

With a strong development department and our own piezocomposite production, we accompany you from th
...
e first product idea to serial production. Our scientists are continuously researching new methods in the field of ultrasonic measurement technology. The progress achieved enables us to offer you optimal solutions.
>

Wireless TOFD scanner

Quick, accurate and highly reproducible welds testing. The System operates wirelessly and is compat
...
ible with any type of Windows based Laptop, Desktop or Tablet.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window