where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

3946 views
Technical Discussions
anjafo
NDT Inspector
Norway, Joined Aug 2009, 204

anjafo

NDT Inspector
Norway,
Joined Aug 2009
204
00:10 Nov-05-2009
Eddy Current V's DPI/MPI

Would Eddy Current find everything DPI/MPI could?

 
 Reply 
 
Godfrey Hands
Consultant,
PRI Nadcap, United Kingdom, Joined Nov 1998, 307

Godfrey Hands

Consultant,
PRI Nadcap,
United Kingdom,
Joined Nov 1998
307
08:30 Nov-05-2009
Re: Eddy Current V's DPI/MPI
In Reply to anjafo at 00:10 Nov-05-2009 (Opening).

Hi Anjafo,
In theory, Eddy Current should find everything that DPI or MPI will, but there are certain limitations.

MPI is field direction sensitive, so you need to be certain that you have covered the component or area with crossing magnetic fields.
The same is applicable to Eddy Current. This will not easily detect a crack when the probe runs along the length of the crack, so once again, you need to double inspect at right angles to the first inspection to be certain of detecting the cracks.

Also when it comes to borderline defect dimensions, there are some limitations.
In a laboratory environment with experimental Eddy Current equipment, we have been sucessful in reliably detecting cracks of 0.020mm deep, whilst with a very sensitive penetrant or magnetic test, detection of smaller defects could be possible. Here however surface finish is critical for all three methods.

Eddy current can also detect defects under a thin non-conductive coating (like MT, but unlike PT).

Regards,

Godfrey

 
 Reply 
 
Jim Draper
Consultant, ASNT Level III MT PT RT VT
Draper NDT, USA, Joined Jul 2009, 99

Jim Draper

Consultant, ASNT Level III MT PT RT VT
Draper NDT,
USA,
Joined Jul 2009
99
20:32 Nov-05-2009
Re: Eddy Current V's DPI/MPI
In Reply to Godfrey Hands at 08:30 Nov-05-2009 .

DPI will is not limited to electricaly conductive material. Also, I have used direct current fluorescent MPI to locate flaws 1/4" deep. Of course that is limited to ferromagnetic material, while eddy current can be used to test other electricaly conductive materials.

 
 Reply 
 

Product Spotlight

Wireless TOFD scanner

Quick, accurate and highly reproducible welds testing. The System operates wirelessly and is compat
...
ible with any type of Windows based Laptop, Desktop or Tablet.
>

Compact NDT inspection-heads for measurements with active thermography

The compact inspection head is suitable for thermographic ndt tasks. The uncooled infrared camera
...
is specially developed for NDI-tasks and offers a thermal sensitivity until now known only from thermal imagers with cooled detector. All required components and functions are integrated into the inspection-head. You will only need an ethernet cable to connect the sensor with the evaluation system.
>

NEW Wheel Type Phased Array Probe

DOPPLER NEW Wheel Type Phased Array Probe, more stable, new tyre makes lesser acoustic attenuation
...
, much lighter makes easier to handle, more slim size, magnetic and mechanical encoder optional etc...more
>

ISONIC 3510

Very Powerful Superior Performance Extremely Portable Smart Phased Array Ultrasonic Flaw Detector an
...
d Recorder with 2 Conventional UT and TOFD Channels uniquely combines PA, single- and multi-channel conventional UT, and TOFD modalities providing 100% raw data recording and imaging. Suitable for all kinds of every-day ultrasonic inspections
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window