where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

1166 views
Technical Discussions
Paul Skidmore
NDT Inspector
USA, Joined Dec 2008, 2

Paul Skidmore

NDT Inspector
USA,
Joined Dec 2008
2
14:51 Nov-12-2009
Mag Particle and Senativity check

IF you have a central conducter rod and a 44 foot of 4 1/2 .250 wall casing pipe how can you check the senativity of mag particle inspection being done on it beside a castrol strip. I have had several differnt people say it cant be done

 
 Reply 
 
Jim Draper
Consultant, ASNT Level III MT PT RT VT
Draper NDT, USA, Joined Jul 2009, 99

Jim Draper

Consultant, ASNT Level III MT PT RT VT
Draper NDT,
USA,
Joined Jul 2009
99
15:34 Nov-12-2009
Re: Mag Particle and Senativity check
In Reply to Paul Skidmore at 14:51 Nov-12-2009 (Opening).

You could also use a QQI. It is a thin piece of metal with grooves in it. There is one with three circles cut into it, each circle a different depth. That would work. You could also use a hall effect gauss meter to verify the magnetic flux density on the surface of the pipe. It should be between 30 and 60 gauss. Or, if you have a piece of the pipe with a known discontinuity of the type you will be looking for, you could use that to prove the sensitivity of the test.

 
 Reply 
 
Andreas
NDT Inspector, Specially in the oilfield
Tuboscope Vetco(Deutschland)Gmbh, Germany, Joined Oct 1999, 131

Andreas

NDT Inspector, Specially in the oilfield
Tuboscope Vetco(Deutschland)Gmbh,
Germany,
Joined Oct 1999
131
16:08 Nov-12-2009
Re: Mag Particle and Senativity check
In Reply to Jim Draper at 15:34 Nov-12-2009 .

Go to the side of ASNT at look there for the technian V8NO2 , it explain well how to chek should be done ba the castrol strip.
Since you have a radial field in the pipe ,there is hardly ay field outside of the pipe.
Easiest way with the strip is to grind a small gouge inthe pipe.
Anyway if you inspect casing acc to API ,there is a recomandation for the minimum cd amperagedepende of the weight of pipe and unit used.
Andreas

 
 Reply 
 
Andreas
NDT Inspector, Specially in the oilfield
Tuboscope Vetco(Deutschland)Gmbh, Germany, Joined Oct 1999, 131

Andreas

NDT Inspector, Specially in the oilfield
Tuboscope Vetco(Deutschland)Gmbh,
Germany,
Joined Oct 1999
131
16:27 Nov-12-2009
Re: Mag Particle and Senativity check
In Reply to Andreas at 16:08 Nov-12-2009 .

For your info the Spec is the API 5A5 and the 5CT.

Regards

Andreas

 
 Reply 
 
Rafid Omar López
Rafid Omar López
22:42 Nov-12-2009
Re: Mag Particle and Senativity check
In Reply to Paul Skidmore at 14:51 Nov-12-2009 (Opening).

I need the norm ASTM E1316. Somebody has this norm? thanks

My mail is: rafid4@hotmail.com

Kind regards.

 
 Reply 
 

Product Spotlight

Portable Ground Penetrating Radar - Proceq GP8000

The Proceq GP8000 portable ground penetrating radar instrument is the beginning of a new era in ND
...
T. The outstanding, patented ultra- wideband technology combined with a compact wireless probe delivers unmatched industry performance. Proceq GP8000 is the world’s first large-scale inspection solution that utilizes Augmented Reality in industrial applications.
>

ISAFE3 Intrinsically Safe Sensor System

ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
...
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
>

NDT.net launches mobile-friendly design

NDT.net has revamped its website providing a mobile-friendly design.The front page received a comp
...
letely new design and all other sections are now reacting responsively on mobile devices. This has been a major step to make our website more user- friendly.
>

OPBOX with standard software is able to do all types of inspections and measurements: flaw detection in welds and materials, scanning of objects, testing composite materials, forged and moulded pieces, many UT inspections, measurements of properties of ma

Typical applications: UT measurements with pulse technique, Measurement of thicknesses also at hig
...
h temperatures, Measurements of properties of materials, including fluids and gases We are delivering a standard version of the software (for any Microsoft Windows up to 10 x64 with Microsoft Hardware certification report Approved) and for special needs: SDK with ready to use examples for LabView, MATLAB x64, C++ wrapper for dll, Python and Linux., and also low-level description of how to control our devices directly from any USB tools
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window