where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Controle Mesure Systemes
Contrôle Mesure Systèmes (CMS) is a leader in Non Destructive Testing (NDT) with a complete range of products for eddy current and ultrasonic i ...
294 views
Job Seeks
Ryan
, IRATA NDT Inspection
United Kingdom, Joined Nov 2009, 2

Ryan

, IRATA NDT Inspection
United Kingdom,
Joined Nov 2009
2
17:51 Nov-23-2009
IRATA, MPI, LPI, Lifting Equipment

Job Location: Worldwide

I am looking for an inspection role on a permanent or contractual basis.

I am IRATA qualified and hold ASNT MPI , LPI L2 NDT tickets which would be relevant to the satisfactory completion of structural maintenance and equipment inspection surveys both on and offshore.

I have 5 years general construction experience gained in the forces, I also have experience with lifting equipment surveys,leak testing, hardness testing (Rockwell and Vickers), acid etch, UT weld and pipe inspection, Thermography , B.O.P Inspection, demolitions, Ultra High Pressure cleaning ( Blasting ), painting, bridge and airfield maintenance. I am happy to travel when needed and have no problems when It comes to working in remote / harsh environments.

I am extremely hard working, disciplined and punctual with a willingness to take on new challenges.

Whilst I thrive in teamwork situations, I am also capable of working individually and using my own initiative to achieve any goals. If you have a project lasting a day or a few weeks and need an NDT inspector I would be happy to travel to you for the duration of the contract.

Please do not hesitate to contact me should you have any work available.

You can take a look at my CV here:

www.hotjobs.yahoo.com/resumes/ryangill83/rgcvtext(4)

 
 

Product Spotlight

iProbe - USB Phased Array Probe

Turn your PC, Laptop or Tablet into a powerful 32:64 Phased Array system with our USB powered Phas
...
ed Array iProbe and inspection software package. Perform affordable weld inspection and corrosion mapping inspections with this powerful but small system. The probe has a 100V pulser, 8K PRF, dual axis encoder input and achieves outstanding signal quality.
>

NEW - TD Focus-ScanRX

The NEW Next Generation Advanced UT platform, TD Focus ScanRX - Also available as a card stack solut
...
ion. Key Improvements 1. Data acquisition is significantly faster than current design 2. Better aesthetic – closely aligns with HandyScan RX 3. Improved IP rating (Target IP66) 4. Ruggedized housing 5. Connectors are protected from impact and ingress 6. Integrated stand and separate retractable handle easy to keep clean) 7. Touchscreen with ruggedized display glass 8. 3-Axis encoder input
>

CIVA 2020 UT Module

CIVA NDE Simulation Software is the world leader of NDT Simulation. The UT simulation Module incl
...
udes: - "Beam computation": Beam propagation simulation - "Inspection Simulation": Beam interaction with flaws or specimens The user can simulate a whole inspection process (pulse echo, tandem or TOFD) with a wide range of probes (conventional, Phased- arrays or EMAT), components, and flaws.
>

HARDNESS TESTER TKM-459CE combi

TKM-459CE combi applies 2 methods of hardness control: UCI and Leeb. It provides high-accuracy tes
...
ting of metals and alloys as well as items of different sizes and configurations, their hardened layers and galvanic coatings. Device represents results in HB, HRC, HV and others. Shock-, dust- and water-proof housing with intuitive software make this gauge easy to use in all working conditions.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window