where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

WesDyne International (AMDATA Products)
WesDyne is an engineering and technical services firm dedicated to providing standard and custom nondestructive examinations (NDE) products and systems
433 views
Technical Discussions
Alexander Mayorov
Engineering
Institute of Applied Physics NAS of Belarus, Belarus, Joined Jul 2001, 2

Alexander Mayorov

Engineering
Institute of Applied Physics NAS of Belarus,
Belarus,
Joined Jul 2001
2
06:08 Jul-12-2001
testing of polyethelen welding joints

I am looking for a NDT method to inspection of welding joints of polyethelen gas pipelines. So any body know of a effective method for identification such defects as a close contact of surfaces without mutual diffusion of materials or have experience in examining of such welding joints please will give an advice

A.Mayorov


 
 Reply 
 
Songping Liu
Songping Liu
03:03 Jul-29-2001
Re: testing of polyethelen welding joints
I have worked in a similar field of NDT on diffusion welding. I think the defects in the welding interface have similar characteristic with your case. I would like to have a detail contact with you about your problem.


 
 Reply 
 

Product Spotlight

FD800 Bench Top Flaw Detectors

The bench-top FD800 flaw detector range combines state-of-the-art flaw detection with advanced mater
...
ial thickness capabilities. Designed for use in the laboratory these gauges are the tool you need for all your flaw detecting needs.
>

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

AIS229 - Multipurpose Real Time System

Latest standard & automatic real time system developed by Balteau. The AIS229 has been designed to
...
do series inspection in a wide variety of industry. Composed of a shielded cabinet, 5 axis manipulator, x-ray generator and tubehead from 160kV to 225kV, a fl at panel & much more, the AIS229 is most certainly one of the most multipurpose RTR system available on the market.
>

GUL QSR1® Scanning

How do you measure pipe wall thickness without direct access to the area? QSR® Scanning - Guide Wav
...
e Quantitative Short Range Scanning.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window