where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Canadian Institute for NDE
We are specialized in training for Radiography, Ultrasonics, Magnetic Particle, Liquid Penetrant, Eddy Current and emerging NDT technologies.
698 views
Technical Discussions
andy wyszomierski
Engineering
Remak Inspection Inc., Canada, Joined Nov 1998, 1

andy wyszomierski

Engineering
Remak Inspection Inc.,
Canada,
Joined Nov 1998
1
02:51 Jan-28-2000
DGS Diagram

Hello
I am looking for information regarding DGS curves for shear wave
transducers.
I am aware of the possibility of buing such transducers but I would like to adopt existing probes.
Customer requirement:4mm Equivalent Flaw Size, 4MHz, 45 and 70 deg. shear wave.
Available :5Mhz, 45 & 70 deg. and ASME side drill hole calibration blocks, IIW Block.
andy




 
 Reply 
 
Neil Breslow
Teacher, - -
NDT Supply.com. Inc., USA, Joined May 2009, 3

Neil Breslow

Teacher, - -
NDT Supply.com. Inc.,
USA,
Joined May 2009
3
03:24 Aug-07-2001
Re: DGS Diagram - let me know if you are still looking for info
Let me know if you are still looking for info.

: Hello
: I am looking for information regarding DGS curves for shear wave
: transducers.
: I am aware of the possibility of buing such transducers but I would like to adopt existing probes.
: Customer requirement:4mm Equivalent Flaw Size, 4MHz, 45 and 70 deg. shear wave.
: Available :5Mhz, 45 & 70 deg. and ASME side drill hole calibration blocks, IIW Block.
: andy

:




 
 Reply 
 

Product Spotlight

Conformable wedge transducer

The conformability is obtained with a flexible membrane filled with water between the transducer and
...
the inspected component. The coupling between the membrane and the component requires a small quantity of water or couplant. The conformable wedge combines the acoustic performance of immersion technique with good coupling and low attenuation.
>

Semi-Automated Phased Array Immersion System for Small Composite Parts

Turn-key semi-automated system as an improved and affordable solution for inspection of small comp
...
osite parts. Includes support table, immersion tank, scanner, PA instrument, PC, Analysis software, database, wedge management and other options.
>

UCI Hardness Tester NOVOTEST T-U2

UCI hardness tester NOVOTEST T-U2 is is used for non-destructive hardness testing of: metals and
...
alloys by scales of hardness: Rockwell (HRC), Brinell (HB), Vickers (HV); non-ferrous metals, alloys of iron etc., and using five additional scales for calibration; with tensile strength (Rm) scale determines the tensile strength of carbon steel pearlitic products by automatic recalculation from Brinell (HB) hardness scale.
>

GUL QSR1® Scanning

How do you measure pipe wall thickness without direct access to the area? QSR® Scanning - Guide Wav
...
e Quantitative Short Range Scanning.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window