where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

DASEL SISTEMAS
Our Phased Array equipments, based on SITAU Technology, are among the PAS highest performance in the market.

951 views
Career Discussions
Rafid O. López
Rafid O. López
00:48 Jan-09-2010
information about penetrant testing

Anyone has information about penetrant testing?? I need present the level III examination in PT.

Thanks.

Best regards.

 
 Reply 
 
S.V.Swamy
Engineering, - Material Testing Inspection & Quality Control
Retired from Nuclear Fuel Complex , India, Joined Feb 2001, 787

S.V.Swamy

Engineering, - Material Testing Inspection & Quality Control
Retired from Nuclear Fuel Complex ,
India,
Joined Feb 2001
787
02:02 Jan-09-2010
Re: information about penetrant testing
In Reply to Rafid O. López at 00:48 Jan-09-2010 (Opening).

You need to get the ASNT recommended study material or go through the various NDT handbooks and also refresh your basic physics of penetrant testing. If you are a level II, you already have about 70% of what you need. If you are planning to directly go for level III exam, you need graduate level preparation.

Best wishes.

 
 Reply 
 
aldo
Engineering
Italy, Joined Jan 2009, 39

aldo

Engineering
Italy,
Joined Jan 2009
39
12:21 Jan-09-2010
Re: information about penetrant testing
In Reply to S.V.Swamy at 02:02 Jan-09-2010 .

Hi lopez...
The answer Mr.swamy is correct...Infact there is not more different between ii level and iii level...
From the point of view on basic theory there are not different (capillary force,wetty ability etc...)
There are some different on metallurgy matter and on procedure menagement of the personal NDT (example NAS, EN, etc). Infact the III level has the totally menagement of CND Aldo

 
 Reply 
 
Rafid O. López
Rafid O. López
16:26 Jan-11-2010
Re: information about penetrant testing
In Reply to aldo at 12:21 Jan-09-2010 .

You are right. I pass the basic examination from ASNT, but I could not pass the pt examination.

I have some material about NDT from ASNT, but a lot information of the study guides, are not in the examination.

I was level II, now i´m an engineer NDT, in aerospace in Queretaro, Mexico.

Best regards.

 
 Reply 
 

Product Spotlight

Micro CT

nanoVoxel series has nano-scale resolution upto 500nm by using high voltage X-ray source (from 80-
...
300 kV) with micro/nano focal spot and highly sensitive flat panel detectors and unique Optical coupling detector.
>

On Demand Webinar: Improve the Efficiency and Accuracy of Inspection Scanning

On-demand webinar on scanning technology that helps improve the efficiency and accuracy of ultrasoni
...
c inspections in oil and gas, aerospace, manufacturing and other industrial applications. The webinar features a scanning solution for multiple inspection environments, including flat and curved specimens, magnetic and nonmagnetic surfaces and raster scanning over long distances. View it today.
>

MANTIS

MANTIS is a compact, powerful and affordable flaw detector (16:64PR), dedicated to field operators
...
. This portable equipment offers standard (electronic-, sector-, compound scan, conventional UT for pulse-echo, dual array and TOFD inspections), and advanced phased-array (real-time TFM -Total Focusing Method). MANTIS benefits from the same intuitive and user-friendly interface (CAPTURE) than Gekko for easier inspections.
>

Research Center IDEKO develops an ultrasonic train wheel inspection system for CAF

The Basque Research centre IK4-IDEKO has developed a state-of-the-art ultrasonic inspection system f
...
or the train wheel. This system secures a sound condition of train wheels and is thus a significant contribution to rail transport safety. The device was delivered to CAF recently and its use allows the manufacturer to become an approved supplier of rolling stock in Italy, as it meets the demanding homologation standards of this country. \\\\r\\\\n
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window