where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

854 views
Technical Discussions
prost80
prost80
20:18 Jan-22-2010
EPOCH XT Ultrasonic equipment

Hello, all

I will like to find out howto calibrate this equipment.I ha the manual but it s out of reach.Is there any one out there who can help.thanks

 
 Reply 
 
Jim
Jim
01:55 Jan-23-2010
Re: EPOCH XT Ultrasonic equipment
In Reply to prost80 at 20:18 Jan-22-2010 (Opening).

Instruction for auto calibration are written on the back of the Epoch XT.

 
 Reply 
 
Nguyen Trong My
Director,
Vietnam Inspection Solutions Co., Ltd, Vietnam, Joined May 2000, 22

Nguyen Trong My

Director,
Vietnam Inspection Solutions Co., Ltd,
Vietnam,
Joined May 2000
22
13:41 Jan-23-2010
Re: EPOCH XT Ultrasonic equipment
In Reply to Jim at 01:55 Jan-23-2010 .

Epoch XT is EN 12668-1 compliant. You might calibrate your gage as per EN 12668-1, group 1 or 2, depending on your calibration purposes. You might also calibrate the gage as per ASTM 317E. If you need more help, please contact me.
Good luck

 
 Reply 
 

Product Spotlight

FD800 Bench Top Flaw Detectors

The bench-top FD800 flaw detector range combines state-of-the-art flaw detection with advanced mater
...
ial thickness capabilities. Designed for use in the laboratory these gauges are the tool you need for all your flaw detecting needs.
>

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

Magnetic X-Ray Pipeline Crawler 6''-60''

Suitable to work in 6''-60''diameter with speed of up to 18m/min, Max. moving diatance 5 kilometer
...
s and provide the efficient inspection of the pipeline.
>

Combination of Digital Image Correlation and Thermographic Measurements

The combination of measuring results from the digital image correlation (ARAMIS, DIC) and temperat
...
ure measuring data from infrared cameras permits the simultaneous analysis of the thermal and mechanical behavior of test specimens in the materials and components testing field.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window