where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

WesDyne International (AMDATA Products)
WesDyne is an engineering and technical services firm dedicated to providing standard and custom nondestructive examinations (NDE) products and systems
1713 views
Technical Discussions
S.Mohamed Riaz
S.Mohamed Riaz
08:56 Jan-25-2010
High temperature Lines - Radiography

Dear experts,

We have stream lines around 450'C - 600'C, we like to take radiography for measure actual thickness.Schedule thickness is 44mm and pipeline diameter is 30".

please help us to give your most valuable ideas, whether we can take radiography with special arrangements.

regards,
riaz

 
 Reply 
 
Nigel Armstrong
Engineering, - Specialist services
United Kingdom, Joined Oct 2000, 1096

Nigel Armstrong

Engineering, - Specialist services
United Kingdom,
Joined Oct 2000
1096
13:29 Jan-25-2010
Re: High temperature Lines - Radiography
In Reply to S.Mohamed Riaz at 08:56 Jan-25-2010 (Opening).

Mohamed

A few ideas.

I take it you dont want to remove insulation and use a high temperature ultrasonic probe and couplant.

44mm wall thickness and 88mm penetrated thickness is on the margins for producing a measurable exposure by Iridium-192 profile radiography using a ball-bearing or the Rikki-T comparator.

To measure corrosion rate without shutting lines down there are means of hot tap and installation of measuring probes.

 
 Reply 
 
Roger Duwe
NDT Inspector, API-510, 570, 653
MISTRAS, USA, Joined Jan 2009, 148

Roger Duwe

NDT Inspector, API-510, 570, 653
MISTRAS,
USA,
Joined Jan 2009
148
22:51 Jan-25-2010
Re: High temperature Lines - Radiography
In Reply to Nigel Armstrong at 13:29 Jan-25-2010 .

In addition to the wall thickness to be penetrated, the curvature will give problems. Typically, profile RT is not used above about 12-inches OD due to the curvature. 30-inch pipe will not give results accurate to use for pressure calculations or measuring material loss.

High-temp couplant and UT-thickness are probably the best method. You only need a 50-75mm hole in the insulation, and it can be replaced with a plug of fiberous insulation -- Kaowool, Cerowool, or similar.

 
 Reply 
 
ligang feng
NDT Inspector,
China, Joined Jan 2010, 3

ligang feng

NDT Inspector,
China,
Joined Jan 2010
3
02:45 Jan-26-2010
Re: High temperature Lines - Radiography
In Reply to S.Mohamed Riaz at 08:56 Jan-25-2010 (Opening).

i am strongly agree with Nigel's ideas.

 
 Reply 
 
Syed Ali
R & D,
Innerspec Technology, USA, Joined Oct 2009, 17

Syed Ali

R & D,
Innerspec Technology,
USA,
Joined Oct 2009
17
05:45 Feb-01-2010
Re: High temperature Lines - Radiography
In Reply to S.Mohamed Riaz at 08:56 Jan-25-2010 (Opening).

Try exploring EMATs for high temperature thickness measurements. Please see for High Temperature EMATs and applications.

 
 Reply 
 

Product Spotlight

Lyft™: Pulsed Eddy Current Reinvented

PEC Reinvented—CUI Programs Redefined Corrosion under insulation (CUI) is possibly the greatest u
...
nresolved asset integrity problem in the industry. Current methods for measuring wall thickness with liftoff, without removing insulation, all have severe limitations. Eddyfi introduces Lyft — a reinvented, high-performance pulsed eddy current (PEC) solution. The patent- pending system features a state-of-the-art portable instrument, real- time C-scan imaging, fast data acquisition with grid-mapping and dynamic scanning modes, and flexibility with long cables. It can also scan through thick metal and insulation, as well as aluminum, stainless steel, and galvanized steel weather jackets. Who else but Eddyfi to reinvent an eddy current technique and redefine CUI programs. Got Lyft?
>

Magnetic X-Ray Pipeline Crawler

Zhong Yi brand pipeline crawler is magnetic/micro-video controlled crawler with DC X ray unit inst
...
alled for checking welding of pipeline. Move steadily inside the pipeline 6''-60''diameter with speed of up to 18m/min, Max. moving diatance 5 kilometers and provide the efficient inspection of the pipeline.
>

PROlineTOP Plug & Play Ultrasonic inspection device

As Plug & Play solution it units all control and operation elements in a small housing and therefo
...
re replaces the typical control cabinet...
>

GUL QSR1® Scanning

How do you measure pipe wall thickness without direct access to the area? QSR® Scanning - Guide Wav
...
e Quantitative Short Range Scanning.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window