where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

1834 views
Technical Discussions
junho
NDT Inspector,
KOREA Material INSPECTION, South Korea, Joined Oct 2009, 21

junho

NDT Inspector,
KOREA Material INSPECTION,
South Korea,
Joined Oct 2009
21
07:23 Jan-25-2010
How to use olympus CDS-7t Wedges????

I bought olympus CDS-7t wedge to surface examination. but I don't know how to use
cds- wedge. And I can not find any resources.

I have been using Olympus omniscan-mx. so, omniscan-mx did a lot of bugs?

 
 Reply 
 
junho
NDT Inspector,
KOREA Material INSPECTION, South Korea, Joined Oct 2009, 21

junho

NDT Inspector,
KOREA Material INSPECTION,
South Korea,
Joined Oct 2009
21
08:48 Jan-25-2010
Re: How to use olympus CDS-7t Wedges????
In Reply to junho at 07:23 Jan-25-2010 (Opening).

and How to calibration????

detection and sizing of OD connected cracks is possible ????.

 
 Reply 
 
James Gauthier
Engineering,
ABB, Inc., USA, Joined Nov 2007, 25

James Gauthier

Engineering,
ABB, Inc.,
USA,
Joined Nov 2007
25
15:36 Jan-25-2010
Re: How to use olympus CDS-7t Wedges????
In Reply to junho at 07:23 Jan-25-2010 (Opening).

The OlympusNDT CDS-7t is a great tool to have in your UT Toolbox. It should be coupled with a transducer that is appropriate for the inspection your are attempting. If you want to learn to use this type of probe/wedge combination, I suggest Mark J. Davis (University of Ultrasonics) crack detection course. They will teach you the methods associated with the creeping wave technique as well as other complimentary techniques.

Good Luck!

Jamie

 
 Reply 
 
Michael Moles †2014 *1948
, Joined ,
21:07 Jan-25-2010
Re: How to use olympus CDS-7t Wedges????
In Reply to junho at 07:23 Jan-25-2010 (Opening).

No, the OmniScan MX is relatively bug-free these days. The very early versions had some issues, as do most first generation instruments, but we seem to be running well these days.

If you have problems, contact your Olympus rep or some other expert like one of the training companies for help.

Michael

 
 Reply 
 
Rick Lopez
R & D,
John Deere - Moline Technology Innovation Center, USA, Joined Jul 2011, 191

Rick Lopez

R & D,
John Deere - Moline Technology Innovation Center,
USA,
Joined Jul 2011
191
23:22 Jun-04-2013
Re: How to use olympus CDS-7t Wedges????
In Reply to junho at 07:23 Jan-25-2010 (Opening).

Although this is an old thread, I was recently looking for information about this wedge style myself. I came across a summary by Olympus (Russ Minkwitz) that you may find useful:
http://www.olympus-ims.com/en/applications/detection-sizing-techniques-id-connected-cracking/

 
 Reply 
 

Product Spotlight

Compact NDT inspection-heads for measurements with active thermography

The compact inspection head is suitable for thermographic ndt tasks. The uncooled infrared camera
...
is specially developed for NDI-tasks and offers a thermal sensitivity until now known only from thermal imagers with cooled detector. All required components and functions are integrated into the inspection-head. You will only need an ethernet cable to connect the sensor with the evaluation system.
>

TESTD-PT SYSTEM

Pulse thermography is a non-contact test method that is ideal for the characterization of thin fil
...
ms and coatings or the detection of defects. With a remarquable short test time and a high detection sensitivity, the Telops TESTD-PT is the perfect tool for non- destructive testing. With such high frame rates, it is even possible to investigate highly conductive or diffusive materials.
>

Combination of Digital Image Correlation and Thermographic Measurements

The combination of measuring results from the digital image correlation (ARAMIS, DIC) and temperat
...
ure measuring data from infrared cameras permits the simultaneous analysis of the thermal and mechanical behavior of test specimens in the materials and components testing field.
>

On Demand Webinar: Using Eddy Current Array for Large Areas in Place of Magnetic Particle and Liquid Penetrant Testing

New on-demand webinar on the use of eddy current array (ECA) technology in lieu of liquid penetrant
...
testing (PT) and magnetic particle testing (MT) for large area screenings. The webinar includes an introduction to the technologies with advantages and disadvantages of each. Side by side examples are discussed including aircraft stringers, engine blades, forgings, weld plates & more. View it today.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window