where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

191 views
Job Offers
Mohammed Aarif
Mohammed Aarif
21:15 Feb-08-2010
NDT Inspector

Job Location: Middle East
offered by Inetgen

Job Description:

Job Title: NDT Inspector
Location: Across GCC Countries
Job Type: Long term contract
Salary: DOE


POSITION DESCRIPTION
Experienced and PCN approved UT Operators required for long term project in GCC Countries. Expected start date ASAP.

Minimum requirements:
Must be PCN approved: UT 3.1, 3.2, 3.8, 3.9 min.
7 years experience in a construction environment
Multidiscipline
Preferred requirements :
Welding Inspector Certification, CSWIP 3.1
PCN surface methods, MPI and/or DPI
Advanced UT methods, TOFD and Phased Array (PCN or CSWIP).

PLEASE NOTE: ASNT qualifications are not acceptable.

All PCN / CSWIP certificates will be verified.

Please send us your updated resume in word format, including your contact details. So we can discuss this opportunity in details.

To apply, please send your CV and covering letter to: maarif@inetgen.com or you reach us at 022 40051023/9821337080

    
 
 

Product Spotlight

High-end Ultrasonic Flaw Detector with 32:128PR PAUT and 2-ch TOFD: SyncScan 2

SIUI’s newly launched SyncScan 2, is a high-end ultrasonic flaw detector with 32:128PR PAUT and
...
2-ch TOFD, which can maximize your efficiency for PA and TOFD. ● Support PA/TOFD/UT ● 32-ch PA is more suitable for inspection on extra-thick wall and high-attenuation material. ● 32-ch PA and 2-ch TOFD work simultaneously. ● Support PR mode for corrosion inspection.
>

SONOAIR - air-coupled Phased Array Ultrasonic Inspection System

For highly attenuating materials, the performance of the system is critical. The ultrasonic sensors,
...
the scanning area and the system settings should be flexibly adapted to the test task and the material. These high expectations are met with the new and modular testing system SONOAIR. With the world’s first air-coupled phased-array UT inspection system SONOAIR we developed a technology that works with up to 4 transmitter and receiver channels with freely configurable square wave burst transmitters as wells as low noise receiving amplifiers.
>

GUL QSR1® Scanning

How do you measure pipe wall thickness without direct access to the area? QSR® Scanning - Guide Wav
...
e Quantitative Short Range Scanning.
>

Compact NDT inspection-heads for measurements with active thermography

The compact inspection head is suitable for thermographic ndt tasks. The uncooled infrared camera
...
is specially developed for NDI-tasks and offers a thermal sensitivity until now known only from thermal imagers with cooled detector. All required components and functions are integrated into the inspection-head. You will only need an ethernet cable to connect the sensor with the evaluation system.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window