where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

855 views
Technical Discussions
André Ribeiro
André Ribeiro
03:58 Feb-09-2010
Mitech MFD 500.

Does anybody can tell me if this device is reliable and works properly?

I am thinking on buy one for me.

http://www.ndtzone.com/Mitech-MFD500-Portable-Ultrasonic-Flaw-Detector-p41.html

 
 Reply 
 
Rolf
Director,
NDT.net, Germany, Joined Nov 1998, 617

Rolf

Director,
NDT.net,
Germany,
Joined Nov 1998
617
07:31 Feb-09-2010
Re: Mitech MFD 500.
In Reply to André Ribeiro at 03:58 Feb-09-2010 (Opening).

I do not know about their devices but in learned that it is difficult to communicate with the company. They sent me a lot of spam and ignored unsubscribe wishes. Since a few months it seems they stopped sending unwanted emails.

 
 Reply 
 

Product Spotlight

Ultrasonic Squirter/Gantry System

TecScan’s NDT Ultrasonic Gantry Systems are industrial Squirter scanners designed for non-destru
...
ctive quality testing and raster scanning of large structures and parts. The Gantry Systems are usually composed of an Industrial Mechanical Scanner and a Control Room with System Workstation.
>

FD800 Bench Top Flaw Detectors

The bench-top FD800 flaw detector range combines state-of-the-art flaw detection with advanced mater
...
ial thickness capabilities. Designed for use in the laboratory these gauges are the tool you need for all your flaw detecting needs.
>

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

NDT.net launches mobile-friendly design

NDT.net has revamped its website providing a mobile-friendly design.The front page received a comp
...
letely new design and all other sections are now reacting responsively on mobile devices. This has been a major step to make our website more user- friendly.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window