where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
194 views
Career Discussions
P Coverdale
P Coverdale
17:21 Feb-15-2010
Beginners advice / guidance needed

All,
Firstly thank you for taken the time out to read my message, I realise after reading through the Forum that their are allot of similar posts and I apologise if this requires repeating information but I feel I need bespoke feedback for my situation.

My father, before he passed, was an NDT inspector; although I was too young to know the full detail of the projects he worked on I feel it’s a calling to me to follow his footsteps.
I am 24, at present I am contracting at Corus in the North East of England as a Technical Clerk. I have built up a commercial awareness and absorbed knowledge from the Steel industry, which I am grateful for the experience but I need a more rewarding role. I have gained my NEBOSH which I had hope would help me progress and I attend any in-house training schemes I can.

My company are looking to fund me through University to complete a Quantity Surveying course although this is not certain.

With my childhood I have always been fascinated with Science, carrying out experiments, investigations etc and learning more about NDT only adds fuel to my fire to become qualified.

I have started read literature with regards to NDT to try and gain knowledge but I feel I am in the same boat as many that I am more than willing to self fund through courses etc but what are my realistic chances of succeeding with no prior experience?
I am trying to rectify this and have been emailing any company possible even if no trainee positions are available.

I have even asked if I could shadow or labour free of charge but as of yet I have received limited response.

My question really is are companies willing to take people on who have completed PT, MPI course but have no experience?

If anyone can provide any feedback, links or companies who may be interested, I would be more than grateful.

Also; a long shot but it is a small world, if anyone knew or worked with my father David Coverdale I would be very interested to hear from you.

Thanks and Regards

Phil

    
 
 Reply 
 

Product Spotlight

FAAST-PA! OEM Patented phased Array for high speed UT inspection

Multiangle, Multifocus, Multifrequency, Multibeam. Instead of stacking UT electronics and having m
...
any PA probes, FAAST-PA is able to transmit all delay laws within ONE single shot in Real time.
>

AIS229 - Multipurpose Real Time System

Latest standard & automatic real time system developed by Balteau. The AIS229 has been designed to
...
do series inspection in a wide variety of industry. Composed of a shielded cabinet, 5 axis manipulator, x-ray generator and tubehead from 160kV to 225kV, a fl at panel & much more, the AIS229 is most certainly one of the most multipurpose RTR system available on the market.
>

Ultrasonic Squirter/Gantry System

TecScan’s NDT Ultrasonic Gantry Systems are industrial Squirter scanners designed for non-destru
...
ctive quality testing and raster scanning of large structures and parts. The Gantry Systems are usually composed of an Industrial Mechanical Scanner and a Control Room with System Workstation.
>

FD800 Bench Top Flaw Detectors

The bench-top FD800 flaw detector range combines state-of-the-art flaw detection with advanced mater
...
ial thickness capabilities. Designed for use in the laboratory these gauges are the tool you need for all your flaw detecting needs.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window