where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

ACS-Solutions GmbH
develop and manufacture hi-tech devices for Ultrasonic Testing
841 views
Career Discussions
Chris
Chris
01:55 Feb-17-2010
NAS 410

May someone be so kind as to offer advice if a certification in accordance with NAS 410 is recommended or if the SNT-TC-1A, ANSI/ASNT CP-189 standards are sufficient for success in the the majority of the field? Please let me know if you have any questions and thank you in advance for your response.

 
 Reply 
 
Godfrey Hands
Consultant,
PRI Nadcap, United Kingdom, Joined Nov 1998, 303

Godfrey Hands

Consultant,
PRI Nadcap,
United Kingdom,
Joined Nov 1998
303
09:26 Feb-17-2010
Re: NAS 410
In Reply to Chris at 01:55 Feb-17-2010 (Opening).

Hi Chris,
It depends on which industrial sector you want to work in and where you live / want to work.
NAS410 is primarily an Aerospace qualification, and in Europe, we tend to use EN4179 as a parallel procedure (in fact the two specifications are so similar that certification is often extended from one to the other with one examination).
EN4179 is however a Company Specific qualification, but the General paper can be "transported" from one employer to the other, with only the Specificf and Practical papers to sit for the new employer.
Inside France, the Aerospace industry used their own scheme (CCA POP 94 001) which is based on EN4179

SNT-TC-1A is a Company Specific paper and as such is not transportable with the operator when he changes employment.
Please take care to differentiate between SNT-TC-1A (administered by ASNT) and an ASNT ANSI certification. many people with SNT certification falsely claim to have "ASNT" certification.
ASNT also offer certification ANSI/ASNT CP-189 (portable) at levels 2 and 3. here, the general paper is also recognised by other schemes.
Other schemes are EN473 (European general purpose certification, but with specific sectors defined) and ISO9712 (similar to EN473).

Perhaps a little confusing, but decide where you want to work and in which sector, and then start looking at the different schemes available.
Godfrey

 
 Reply 
 
Mark Warchol
Engineering, - Research
MFAW NDT, LLC, USA, Joined Feb 2010, 3

Mark Warchol

Engineering, - Research
MFAW NDT, LLC,
USA,
Joined Feb 2010
3
06:21 Feb-18-2010
Re: NAS 410
In Reply to Godfrey Hands at 09:26 Feb-17-2010 .

One of the important issues with SNT-TC-1A that is often confused is that it is NOT a specification. It is a recommentation (a "how to" guide, if you will) that describes what SHOULD be in a specification or internal procedure. It does not mandate anything. Where as ISO 9712, NAS 410, EN4179 (and others) precribe the minimum that SHALL be in the internal procedure and the minimum qualifications of an inspector.

In theory, someone that shows up for work and has "ultrasonics" written on a piece of paper on their desk, COULD meet the requirements of an internal procedure that "meets" SNT-TC-1A. I am being a bit sarcastic, but the reality is that a "certification" to SNT-TC-1A may not be worth the piece of paper it is written on.

As Geofrey describes, only "portable" certifications, as such, meet a true minimum requirement.

Mark
MFAW NDT, LLC

 
 Reply 
 

Product Spotlight

Combination of Digital Image Correlation and Thermographic Measurements

The combination of measuring results from the digital image correlation (ARAMIS, DIC) and temperat
...
ure measuring data from infrared cameras permits the simultaneous analysis of the thermal and mechanical behavior of test specimens in the materials and components testing field.
>

Ultrasonic tomograph for imaging of concrete structures А1040 MIRA

Applicable for concrete inspection allowing imaging of the internal structure of objects from conc
...
rete, reinforced concrete, different stones. The operation applies pulse-echo technique at one-side access to the object. The instrument is feasible for concrete inspection for searching conduct ducts, conduits, detection of foreign inclusions, holes, honeycombing, cracks and other concrete defects.
>

SONOAIR - air-coupled Phased Array Ultrasonic Inspection System

For highly attenuating materials, the performance of the system is critical. The ultrasonic sensors,
...
the scanning area and the system settings should be flexibly adapted to the test task and the material. These high expectations are met with the new and modular testing system SONOAIR. With the world’s first air-coupled phased-array UT inspection system SONOAIR we developed a technology that works with up to 4 transmitter and receiver channels with freely configurable square wave burst transmitters as wells as low noise receiving amplifiers.
>

Ultrasonic Squirter/Gantry System

TecScan’s NDT Ultrasonic Gantry Systems are industrial Squirter scanners designed for non-destru
...
ctive quality testing and raster scanning of large structures and parts. The Gantry Systems are usually composed of an Industrial Mechanical Scanner and a Control Room with System Workstation.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window