where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

1044 views
Technical Discussions
junho
NDT Inspector,
KOREA Material INSPECTION, South Korea, Joined Oct 2009, 21

junho

NDT Inspector,
KOREA Material INSPECTION,
South Korea,
Joined Oct 2009
21
14:22 Feb-19-2010
creeping wave methode

hi all

I wondering, Is ASME explaining creeping wave method
for ID deadzone inspect

thank you

    
 
 
Carlos Correia
R & D, - -
UCV & EGROUP, Venezuela, Joined Oct 2008, 120

Carlos Correia

R & D, - -
UCV & EGROUP,
Venezuela,
Joined Oct 2008
120
19:05 Feb-19-2010
Re: creeping wave methode
In Reply to junho at 14:22 Feb-19-2010 (Opening).

Hello Junho, CW Method is still beyond ASME considerations. You should to check the 2007 edition. But you can write to Ed Ginzel or to Mark Davis. They are part of this forum and is sure they know...

    
 
 
Ed Ginzel
R & D, -
Materials Research Institute, Canada, Joined Nov 1998, 1252

Ed Ginzel

R & D, -
Materials Research Institute,
Canada,
Joined Nov 1998
1252
19:09 Feb-19-2010
Re: creeping wave methode
In Reply to junho at 14:22 Feb-19-2010 (Opening).

Mr Park
ASME does not describe the "so-called" creeping wave. When you examine the arrival times of the signals when peaking a small depth notch on the opposite wall it will be seen that the detection is actually achieved by the shear headwave. This can be done using a refracted compression mode at some angle between about 70° to 80°
Good description can be found on the application of the techniques in general on http://www.ndt.net/article/pow1297/schmid/schmid.htm

    
 
 
andrew cunningham
NDT Inspector
Canada, Joined Jun 2008, 238

andrew cunningham

NDT Inspector
Canada,
Joined Jun 2008
238
23:55 Feb-22-2010
Re: creeping wave methode
In Reply to junho at 14:22 Feb-19-2010 (Opening).

Download Mode Change, Creeping Wave or Corner Trap???

Hi Junho

Please find attachment that may explain acoustics of an ID connected reflector.
I hope it helps you.

Yours sincerely
Andrew
    
 
 

Product Spotlight

Alpha Pro Digital Radiography System

The Alpha Pro digital X-ray system is the ideal system for your NDT \r\nneeds, as it offers amazin
...
g 16 bit images which enable the highest \r\nlevel of detection and identification of hairline cracks. While weighing only 3kg (6.6lbs), this panel has the largest imaging area: 35 X 43 cm (14X17 in).
>

TESTD-PT SYSTEM

Pulse thermography is a non-contact test method that is ideal for the characterization of thin fil
...
ms and coatings or the detection of defects. With a remarquable short test time and a high detection sensitivity, the Telops TESTD-PT is the perfect tool for non- destructive testing. With such high frame rates, it is even possible to investigate highly conductive or diffusive materials.
>

NovaScope 6000

The all-digital Novascope 6000 is a portable, ultra-high precision thickness gauge for high-speed
...
thickness measurement. Novascope 6000 has unmatched capabilities and unique features including: •Superior Resolution with high contrast, high-speed color RF display •High pulser voltage •Real-time video output •Increased internal/external data storage •Programmable SetUp features •Battery & AC Powered
>

NEOS III

NEOS III is Logos Imagings lightest DR system. With a built-in battery and internal wireless commu
...
nication, the NEOS III is perfect for users that want to quickly assess an item.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window