where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

724 views
Technical Discussions
Rafid O. Lopez
, NDT Level 3
Mexico, Joined Jan 2010, 82

Rafid O. Lopez

, NDT Level 3
Mexico,
Joined Jan 2010
82
21:45 Feb-24-2010
Aircraft standards

Someone know that standard (ASTM or AMS) are for to perform inspections of Eddy Current and Ultrasonic testing in aircraft sector?

(i.e. for PT is ASTM E1417 or AMS 2647B or MT is ASTM 1444 or AMS 3044)

We perform inspections in engines of EC and UT, but in accordance with specification (SPM) of P&W and GE.

Best regards.

 
 Reply 
 
Michel Couture
NDT Inspector,
consultant, Canada, Joined Sep 2006, 891

Michel Couture

NDT Inspector,
consultant,
Canada,
Joined Sep 2006
891
23:19 Feb-24-2010
Re: Aircraft standards
In Reply to Rafid O. Lopez at 21:45 Feb-24-2010 (Opening).

Rafid,
From experience, there is no standard like ASTM or AMS per say. Normally the aircraft manufacturer will write their own standards and each aircraft will come with its own NDT Manual and will be part of the Maintenance Manual Library.

But they do follow ASTM somehow.

 
 Reply 
 

Product Spotlight

NDT.net launches mobile-friendly design

NDT.net has revamped its website providing a mobile-friendly design.The front page received a comp
...
letely new design and all other sections are now reacting responsively on mobile devices. This has been a major step to make our website more user- friendly.
>

Eddy Current inspection : RotoETscan Rotating Head

The rotating head RotoETscan detects the presence of longitudinal surface or sub surface defects a
...
t high speed. The rotating head is often installed directly on the production line. It is generally dedicated to the control of long products such as tubes, bars and wires, made of ferrous or non-ferrous material. It can also be used for inspection of small parts (billets).
>

iProbe - USB Phased Array Probe

Turn your PC, Laptop or Tablet into a powerful 32:64 Phased Array system with our USB powered Phas
...
ed Array iProbe and inspection software package. Perform affordable weld inspection and corrosion mapping inspections with this powerful but small system. The probe has a 100V pulser, 8K PRF, dual axis encoder input and achieves outstanding signal quality.
>

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window