where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

2502 views
Career Discussions
DEBDUTTA MALLIK
Consultant,
Malaysia, Joined Jun 2005, 37

DEBDUTTA MALLIK

Consultant,
Malaysia,
Joined Jun 2005
37
22:20 Feb-24-2010
Request for model question ASNT Level-III

Sir,
If anyone can send me some model question of ASNT-III Basic Examination.

Regards,

Debdutta Mallik

 
 Reply 
 
Jim Tedesco
Director,
Aerospace manufacturing, USA, Joined Jul 2007, 3

Jim Tedesco

Director,
Aerospace manufacturing,
USA,
Joined Jul 2007
3
14:28 Feb-25-2010
Re: Request for model question ASNT Level-III
In Reply to DEBDUTTA MALLIK at 22:20 Feb-24-2010 (Opening).

You're looking for questions on the exam? My suggestion is you read the reference material and spend sufficient time studying, if you're experienced and prepared you'll know the answers to the questions!

 
 Reply 
 
Rafid O. Lopez
, NDT Level 3
Mexico, Joined Jan 2010, 82

Rafid O. Lopez

, NDT Level 3
Mexico,
Joined Jan 2010
82
16:34 Feb-25-2010
Re: Request for model question ASNT Level-III
In Reply to Jim Tedesco at 14:28 Feb-25-2010 .

DEBDUTTA

I can help you. I will send the Level III study guide basic from ASNT.

If any more need this information might send me a mail.

I need also information for level III in PT, if anyone has some information and can send me it, i will appreciate it much.

Best regards.

Rafid

 
 Reply 
 
Atif Bari
Engineering
MRF, Pakistan, Joined Jan 2009, 14

Atif Bari

Engineering
MRF,
Pakistan,
Joined Jan 2009
14
19:28 Feb-25-2010
Re: Request for model question ASNT Level-III
In Reply to Rafid O. Lopez at 16:34 Feb-25-2010 .

What you want to know about ASNT PT Level III?

 
 Reply 
 
Rafid O. Lopez
, NDT Level 3
Mexico, Joined Jan 2010, 82

Rafid O. Lopez

, NDT Level 3
Mexico,
Joined Jan 2010
82
21:38 Feb-25-2010
Re: Request for model question ASNT Level-III
In Reply to Atif Bari at 19:28 Feb-25-2010 .

I want to prepare to take the PT examination level III (again), the last year i fail the examination and this time i want study more; all method.

I want some material that can help me to understand the method, but at a Level 3. I have planned to buy Nondestructive Testing Handbook, Third Edition: Volume 2, Liquid Penetrant Testing from asnt. The examination is in August.

Best regards.

Rafid

 
 Reply 
 
William Blum
Consultant, Training, Level III Services
NDT Consulting Group Inc., USA, Joined Nov 2000, 92

William Blum

Consultant, Training, Level III Services
NDT Consulting Group Inc.,
USA,
Joined Nov 2000
92
10:52 Feb-27-2010
Re: Request for model question ASNT Level-III
In Reply to DEBDUTTA MALLIK at 22:20 Feb-24-2010 (Opening).

ASNT (www.asnt.org) offers a Level III study guide which has sample questions as well as a book containing Level I, Level II and Level III question banks.

Bill
NDT Level III
NDT Consulting Group Inc.
www.ndt-cgi.com

 
 Reply 
 
uzairmet
uzairmet
07:53 Jun-06-2012
Re: Request for model question ASNT Level-III
In Reply to William Blum at 10:52 Feb-27-2010 .

Can any one can guide me that is the examination of level III in UT conducted in Pakistan on not. if yes kindly send me the information, also send me some real type questions bank of level III exams.

any generous help will be welcomed

 
 Reply 
 

Product Spotlight

Research Center IDEKO develops an ultrasonic train wheel inspection system for CAF

The Basque Research centre IK4-IDEKO has developed a state-of-the-art ultrasonic inspection system f
...
or the train wheel. This system secures a sound condition of train wheels and is thus a significant contribution to rail transport safety. The device was delivered to CAF recently and its use allows the manufacturer to become an approved supplier of rolling stock in Italy, as it meets the demanding homologation standards of this country. \\\\r\\\\n
>

Extended Range Variable Wall® Piping Calibration Blocks for Longseam Inspection

This set of two blocks has been specially designed for situations where ultrasonic examination tak
...
es place circumferentially or “around the curve” for applications such as inspection of longseam welds in piping and vessels. Jointly designed by PH Tool and Holloway NDT, the blocks feature side-drilled hole reflectors positioned within novel compound-curves, each with multiple thickness steps. The unique design results in a light and compact form factor, with the largest block weighing just over 15 lbs and spanning just 16 ¾”. Coverage is provided for nominal pipe sizes from 6” to 10” in the small block and 12” to a whopping 56” in the large block. The compound OD curves and multiple wall thicknesses actually exceed ASME requirements, providing exceptional signal response and measurement accuracy. Properly managing beam divergence off the ID and stabilizing beam skew due to probe rocking is essential to maintaining a consistent calibration when inspecting lengthwise on curved surfaces.
>

Ultrasonic Testing Immersion Tanks with Unmatched Scanning Features

TecScan’s non-destructive testing Ultrasonic Immersion Tanks & scanners are designed for high pe
...
rformance and demanding NDT testing applications. Our Scan3D™ line of High Precision Immersion Tanks are specifically designed for automated ultrasonic testing of complex composites parts used in aerospace and industrial applications.
>

Echomac® PA Bar Tester

The Echomac® PA BT provides 100% inspection of round bars for core and surface defects, at speeds u
...
p to 2 m/sec, depending on the specific application. The unit allows producers to handle a much larger range of diameters in one installation, and is available in 3 models to test 10 – 75mm diameter (small model); 20 – 130mm (medium model) or 50 – 254mm (large model) bars.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window