where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
366 views
Job Offers
Hera
Hera
08:30 Mar-02-2010
MT, PT, UT OCTG (EMI) & lifting Inspectors + Supervisors

Job Location: Indonesia, Malaysia, Singapore
offered by Scomi OMS

Candidates are invited to submit their CV’s to take up positions as Supervisor's/Field Inspectors.
Must demonstrate fluency and comprehension in both written and spoken English, able to use Microsoft Word and Excel programs.

Experienced candidates with previous Oilfield related Tubular/Lift and weld inspection are invited to submit their CV’s.

6 Positions available for experienced Inspectors.

Ideally the experienced candidates will :

•Graduate from a Technical institution in Mechanical or Electrical disciplines.
•Posses ASNT certification in at least two of the more of the following Level II PT, MT, UT, ET, or EMI experience.
•Experienced in performing new/used API OCTG, drill string and BHA, lift equipment and weld inspection for both onshore and offshore locations.
•Undertaken Inspection to T. H. Hill DS – 1 or NS – 2, British Standard, DNV and API Standards.
•Be prepared to travel and work with minimal supervision for extended periods.

Applicant are invited to e mail their CV’s with photograph to the following mail box : herawati.suhendro@scomioms.com

Applications shall be held in the strictest of confidence.
Good salaries and benefits paid for the right people.
Room for rapid advancement in a young and energetic company.

    
 
 

Product Spotlight

Panther

M2M PANTHER is a phased-array equipment designed for both desktop and industrial applications, offer
...
ing unparalleled performance in a compact unit. It combines the speed required for industrial integrated Phased-Array Ultrasound (PAUT) solutions, with the most complete set of total focusing method (TFM) imaging techniques, making it the ultimate tool for R&D and procedure qualification.
>

ISAFE3 Intrinsically Safe Sensor System

ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
...
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
>

XRHRobotStar

In high volume industries like automotive the requirement for a hundred percent X-ray inspection c
...
reates a bottleneck in the production. The XRHRobotStar is a fully Automated Defect Recognition (ADR) capable robot-system that allows an ultra-fast in-line inspection.
>

AMIGO2

TSC Amigo2 - ACFM technology has developed a solid reputation for accurately detecting and sizing
...
surface-breaking cracks through paint and coatings. As the industry demands increased performance in speed, signal quality, and portability, it’s time for an evolution. It’s time for Amigo2.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window