|   2505 views |
 Technical Discussions | |  Jim McGregor
QA Manager/ NDT lecturer
AMEC, Australia, Joined Oct 2000,  1  |
Jim McGregor
QA Manager/ NDT lecturer
AMEC,
Australia,
Joined Oct 2000
1
|  05:39 Aug-22-2001
Proficiency test plates I am looking for a supplier of welded test plates/pipes/tee/etc suitable for UT/MT/RT/PT proficiency testing. Does anyone know of a supplier that can provide these at a reasonable price?
| |
| | | |  Udo Schlengermann
Consultant, -
Standards Consulting, Germany, Joined Nov 1998, 178  | | 00:52 Aug-22-2001
Re: Proficiency test plates reply by Udo Schlengermann :You can contact Sonaspection International Ltd
Lancaster LA1 3NX, UK
phone +44-1524-34991
Martin Peacock
Kind regards
Udo Schlengermann
+++: I am looking for a supplier of welded test plates/pipes/tee/etc suitable for UT/MT/RT/PT proficiency testing. Does anyone know of a supplier that can provide these at a reasonable price?
.
|
| | | | George Pherigo
Other, Owner
PH Diversified, Inc., FlawTech Division, USA, Joined Oct 1999, 8 |
George Pherigo
Other, Owner
PH Diversified, Inc., FlawTech Division,
USA,
Joined Oct 1999
8
| 05:02 Aug-22-2001
Re: Proficiency test plates FlawTech,Inc can provide a wide variety of NDT test specimens ranging from large custom flawed specimens to Level I-II basic training specimens. Contact:FlawTech, Inc.
5040 Hwy 49
Harrisburg, NC 28075
attn: John Turner
phone: 704 455 1322
fax: 704 455 1323
email; JTurner@FlawTech.com : I am looking for a supplier of welded test plates/pipes/tee/etc suitable for UT/MT/RT/PT proficiency testing. Does anyone know of a supplier that can provide these at a reasonable price?
.
| |
| | | | Phil Herman Jr.
| Phil Herman Jr.
| 07:05 Aug-22-2001
Re: Proficiency test plates Jim,PH Tool Reference Standards manufactures the Liquid Penetrant Test Plates for Personnel Qualification that meet the US Navy's NSTR-99 Rev. 2 requirements. These plates are made in Type 304 Stainless Steel (CRES) and measure 1/2" x 5" x 7" and contain one as-weld, one contoured weld, and one bevel weld. The defects consist of twelve microholes measuring .004-.005" diameter x .008-.010" deep, and one linear indication (EDM notch) measuring .002-.003 wide x .010-.015 deep x .250" long. The flaws are randomly located and are dimensionally certified traceable to NIST, and include a map of flaw locations. For more info, visit http://www.phtool.com or email PH Tool at sales@phtool.com. Phil Herman Jr.
Vice President
PH Tool Reference Standards
Toll free: 888-553-9245 : I am looking for a supplier of welded test plates/pipes/tee/etc suitable for UT/MT/RT/PT proficiency testing. Does anyone know of a supplier that can provide these at a reasonable price?
.
| |
| | | | Russ Fessenden
NDT Inspector, Manager
USA, Joined Jun 2000, 9 | | 01:38 Aug-22-2001
Re: Proficiency test plates Sonaspection's US office is located in Covington, GA and can be reached ar 770-787-8776.: reply by Udo Schlengermann :
.
: You can contact Sonaspection International Ltd
: Lancaster LA1 3NX, UK
: phone +44-1524-34991
: Martin Peacock
: Kind regards
: Udo Schlengermann
: +++
.
: : I am looking for a supplier of welded test plates/pipes/tee/etc suitable for UT/MT/RT/PT proficiency testing. Does anyone know of a supplier that can provide these at a reasonable price?
: .
.
|
| | | | D.Bentley
| D.Bentley
| 09:39 Jan-18-2002
Re: Proficiency test plates : I am looking for a supplier of welded test plates/pipes/tee/etc suitable for UT/MT/RT/PT proficiency testing. Does anyone know of a supplier that can provide these at a reasonable price?
. Jim ,I have for sale Two Sonatest UT plates and TWo surface methods plates all with result sheets and certification.In as new condition . Located in Perth as I believe you are. E-Mail me if interested.
| |
| | | |  Phil Herman Jr.
Sales, - Manufacture of NDT Reference Standards/Test Blocks
PH Tool Reference Standards, USA, Joined Oct 1999, 79   |
Phil Herman Jr.
Sales, - Manufacture of NDT Reference Standards/Test Blocks
PH Tool Reference Standards,
USA,
Joined Oct 1999
79
| 06:04 Jan-18-2002
Re: Proficiency test plates Try Flawtech in Harrisburg, NC. Ask for Mr. John Turner. Tel: (704)4551322, fax: (704)4551323
email: info@flawtech.com, URL: www.flawtech.com.
: : I am looking for a supplier of welded test plates/pipes/tee/etc suitable for UT/MT/RT/PT proficiency testing. Does anyone know of a supplier that can provide these at a reasonable price?
: . Jim ,
.
: I have for sale Two Sonatest UT plates and TWo surface methods plates all with result sheets and certification.In as new condition . Located in Perth as I believe you are. E-Mail me if interested.
.
| |
| | | | Aaron Pherigo
| Aaron Pherigo
| 02:59 Apr-04-2002
Re: Proficiency test plates FlawTech can offer the best prices and highest quality flawed specimens.Contact Aaron or John at (704) 455-1322.
| |
| | | | | |
|
NDT Reference Standards and Test Blocks
