where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
223 views
Job Seeks
khalid
khalid
12:24 Mar-10-2010
Inspection Engineer

Job Location: Worldwide

I am a graduate Mechanical Engineer having 15 years experience in the field of In process Inspection of Pressure Vessels, Heat Exchangers, Piping, Storage tanks, Steel Structure & Condition monitoring of Rotary equipment etc. I have valid API-510 Certification, Level 2 in Radiographic testing, Level 1 in Ultrasonic Testing & CWB (Canadian Welding Bureu) Welding Inspector Because of this experience, I can make a direct and immediate contribution to your department.
My resume is attached ,which details my qualifications and suggests how I might be of service to you.
I would appreciate an opportunity to discuss the position with you further.
I am available for immediate appointment and can travel extensively or
relocate as required.
You may call me at +92300-2336129, where messages may be left if I am personally unavailable.

Thank you, and I look forward to hearing from you soon.


Sincerely yours





___________
Jawed Ahsan
C-18, Block-1, Street 3, Chaple Sun City
Gulzar-e-Hijri, Karachi, Pakistan
Cell #0092300-2336129

 
 

Product Spotlight

GEKKO - Portable Phased Array Testing with TFM in Real-Time

The portable phased array testing system GEKKO provides 64 parallel test channels. On creating testi
...
ng parameters the operator is assisted by the CIVA software. Due to its modular set-up the GEKKO instrument is suitable for operators of all skill levels.
>

Semi-Automated Phased Array Immersion System for Small Composite Parts

Turn-key semi-automated system as an improved and affordable solution for inspection of small comp
...
osite parts. Includes support table, immersion tank, scanner, PA instrument, PC, Analysis software, database, wedge management and other options.
>

Eddy Current inspection : RotoETscan Rotating Head

The rotating head RotoETscan detects the presence of longitudinal surface or sub surface defects a
...
t high speed. The rotating head is often installed directly on the production line. It is generally dedicated to the control of long products such as tubes, bars and wires, made of ferrous or non-ferrous material. It can also be used for inspection of small parts (billets).
>

UCI Hardness Tester NOVOTEST T-U2

UCI hardness tester NOVOTEST T-U2 is is used for non-destructive hardness testing of: metals and
...
alloys by scales of hardness: Rockwell (HRC), Brinell (HB), Vickers (HV); non-ferrous metals, alloys of iron etc., and using five additional scales for calibration; with tensile strength (Rm) scale determines the tensile strength of carbon steel pearlitic products by automatic recalculation from Brinell (HB) hardness scale.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window