where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
3326 views
Career Discussions
Rafid O. Lopez
, NDT Level 3
Mexico, Joined Jan 2010, 79

Rafid O. Lopez

, NDT Level 3
Mexico,
Joined Jan 2010
79
21:49 Mar-11-2010
Densitometer calibration

Someone know on the difference between adjust and calibration in the densitometer? or if someone has information on this topic.

I want to do the adjust and calibration in accordance with the standard, but i do not have this standard.

I wanted to search information in the standard but, this standard change in the last revision.
Before: E 1079 Practice for Calibration of Transmission Densitometers
Now: ASTM E1709 - 09 Standard Test Method for Measurement of Retroreflective Signs Using a Portable Retroreflectometer at a 0.2 Degree Observation Angle.

Thanks all.

 
 Reply 
 
Nigel Armstrong
Engineering, - Specialist services
United Kingdom, Joined Oct 2000, 1096

Nigel Armstrong

Engineering, - Specialist services
United Kingdom,
Joined Oct 2000
1096
07:16 Mar-15-2010
Re: Densitometer calibration
In Reply to Rafid O. Lopez at 21:49 Mar-11-2010 (Opening).

Hello Rafid

Adjust your densitometer after appropriate warm-up time by placing it direct on to the iluminated viewing screen and setting the reading to "0".

Then, calibration as per E 1079 2005 (latest issue according to ASTM website) is still achieved using the NIST calibrated X-ray step tablet. Use density steps closest to 0,3, 3,0 and 3,9 values. "If any of the recorded density values vary by more than +/-0,05 density units from the density values on the claibrated step tablet, the linearity of the densitometer is out of tolerance and should be corrected." Read manufacturer's instructions for how to adjust - usually a small screw altering the potentiometer settings.

All results to be recorded. In my opinion any deviation should be notified to supervisor for checking and if deviation is confirmed then to quality management.

E 1709 as you correctly wrote covers a topic totally unconnected with radiography.

 
 Reply 
 
Rafid O. Lopez
, NDT Level 3
Mexico, Joined Jan 2010, 79

Rafid O. Lopez

, NDT Level 3
Mexico,
Joined Jan 2010
79
21:21 Mar-16-2010
Re: Densitometer calibration
In Reply to Nigel Armstrong at 07:16 Mar-15-2010 .

Excellent.

This information will be very useful.

Thanks Nigel.

Best regards.

 
 Reply 
 

Product Spotlight

GUL QSR1® Scanning

How do you measure pipe wall thickness without direct access to the area? QSR® Scanning - Guide Wav
...
e Quantitative Short Range Scanning.
>

MIZ®-21C: Truly Affordable Eddy Current Handheld with Surface Array Capability

Introducing MIZ-21C, the first truly affordable handheld eddy current instrument with surface array
...
capabilities. MIZ-21C can deliver fast, accurate inspections in demanding NDT applications including aerospace, oil and gas, manufacturing, and power generation. The surface array solution can reduce inspection time by up to 95% compared to traditional handheld pencil probes. The ergonomic design, long battery life, and intuitive touchscreen mean you can inspect more areas faster than ever without fatigue.
>

NEW Wheel Type Phased Array Probe

DOPPLER NEW Wheel Type Phased Array Probe, more stable, new tyre makes lesser acoustic attenuation
...
, much lighter makes easier to handle, more slim size, magnetic and mechanical encoder optional etc...more
>

CIVA 2017 UT Module

CIVA NDE Simulation Software is the world leader of NDT Simulation. The UT simulation Module incl
...
udes: - "Beam computation": Beam propagation simulation - "Inspection Simulation": Beam interaction with flaws or specimens The user can simulate a whole inspection process (pulse echo, tandem or TOFD) with a wide range of probes (conventional, Phased- arrays or EMAT), components, and flaws.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window