where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
2510 views
Technical Discussions
Jim McGregor
QA Manager/ NDT lecturer
AMEC, Australia, Joined Oct 2000, 1

Jim McGregor

QA Manager/ NDT lecturer
AMEC,
Australia,
Joined Oct 2000
1
05:39 Aug-22-2001
Proficiency test plates

I am looking for a supplier of welded test plates/pipes/tee/etc suitable for UT/MT/RT/PT proficiency testing. Does anyone know of a supplier that can provide these at a reasonable price?


 
 Reply 
 
Udo Schlengermann
Consultant, -
Standards Consulting, Germany, Joined Nov 1998, 178

Udo Schlengermann

Consultant, -
Standards Consulting,
Germany,
Joined Nov 1998
178
00:52 Aug-22-2001
Re: Proficiency test plates
reply by Udo Schlengermann :

You can contact Sonaspection International Ltd
Lancaster LA1 3NX, UK
phone +44-1524-34991
Martin Peacock
Kind regards
Udo Schlengermann
+++

: I am looking for a supplier of welded test plates/pipes/tee/etc suitable for UT/MT/RT/PT proficiency testing. Does anyone know of a supplier that can provide these at a reasonable price?
.



 
 Reply 
 
George Pherigo
Other, Owner
PH Diversified, Inc., FlawTech Division, USA, Joined Oct 1999, 8

George Pherigo

Other, Owner
PH Diversified, Inc., FlawTech Division,
USA,
Joined Oct 1999
8
05:02 Aug-22-2001
Re: Proficiency test plates
FlawTech,Inc can provide a wide variety of NDT test specimens ranging from large custom flawed specimens to Level I-II basic training specimens. Contact:

FlawTech, Inc.
5040 Hwy 49
Harrisburg, NC 28075
attn: John Turner
phone: 704 455 1322
fax: 704 455 1323
email; JTurner@FlawTech.com

: I am looking for a supplier of welded test plates/pipes/tee/etc suitable for UT/MT/RT/PT proficiency testing. Does anyone know of a supplier that can provide these at a reasonable price?
.



 
 Reply 
 
Phil Herman Jr.
Phil Herman Jr.
07:05 Aug-22-2001
Re: Proficiency test plates
Jim,

PH Tool Reference Standards manufactures the Liquid Penetrant Test Plates for Personnel Qualification that meet the US Navy's NSTR-99 Rev. 2 requirements. These plates are made in Type 304 Stainless Steel (CRES) and measure 1/2" x 5" x 7" and contain one as-weld, one contoured weld, and one bevel weld. The defects consist of twelve microholes measuring .004-.005" diameter x .008-.010" deep, and one linear indication (EDM notch) measuring .002-.003 wide x .010-.015 deep x .250" long. The flaws are randomly located and are dimensionally certified traceable to NIST, and include a map of flaw locations.

For more info, visit http://www.phtool.com or email PH Tool at sales@phtool.com.

Phil Herman Jr.
Vice President
PH Tool Reference Standards
Toll free: 888-553-9245

: I am looking for a supplier of welded test plates/pipes/tee/etc suitable for UT/MT/RT/PT proficiency testing. Does anyone know of a supplier that can provide these at a reasonable price?
.



 
 Reply 
 
Russ Fessenden
NDT Inspector, Manager
USA, Joined Jun 2000, 9

Russ Fessenden

NDT Inspector, Manager
USA,
Joined Jun 2000
9
01:38 Aug-22-2001
Re: Proficiency test plates
Sonaspection's US office is located in Covington, GA and can be reached ar 770-787-8776.

: reply by Udo Schlengermann :
.
: You can contact Sonaspection International Ltd
: Lancaster LA1 3NX, UK
: phone +44-1524-34991
: Martin Peacock
: Kind regards
: Udo Schlengermann
: +++
.
: : I am looking for a supplier of welded test plates/pipes/tee/etc suitable for UT/MT/RT/PT proficiency testing. Does anyone know of a supplier that can provide these at a reasonable price?
: .
.



 
 Reply 
 
D.Bentley
D.Bentley
09:39 Jan-18-2002
Re: Proficiency test plates
: I am looking for a supplier of welded test plates/pipes/tee/etc suitable for UT/MT/RT/PT proficiency testing. Does anyone know of a supplier that can provide these at a reasonable price?
. Jim ,

I have for sale Two Sonatest UT plates and TWo surface methods plates all with result sheets and certification.In as new condition . Located in Perth as I believe you are. E-Mail me if interested.



 
 Reply 
 
Phil Herman Jr.
Sales, - Manufacture of NDT Reference Standards/Test Blocks
PH Tool Reference Standards, USA, Joined Oct 1999, 79

Phil Herman Jr.

Sales, - Manufacture of NDT Reference Standards/Test Blocks
PH Tool Reference Standards,
USA,
Joined Oct 1999
79
06:04 Jan-18-2002
Re: Proficiency test plates
Try Flawtech in Harrisburg, NC. Ask for Mr. John Turner. Tel: (704)•455•1322, fax: (704)•455•1323
email: info@flawtech.com, URL: www.flawtech.com.


: : I am looking for a supplier of welded test plates/pipes/tee/etc suitable for UT/MT/RT/PT proficiency testing. Does anyone know of a supplier that can provide these at a reasonable price?
: . Jim ,
.
: I have for sale Two Sonatest UT plates and TWo surface methods plates all with result sheets and certification.In as new condition . Located in Perth as I believe you are. E-Mail me if interested.
.



 
 Reply 
 
Aaron Pherigo
Aaron Pherigo
02:59 Apr-04-2002
Re: Proficiency test plates
FlawTech can offer the best prices and highest quality flawed specimens.

Contact Aaron or John at (704) 455-1322.



 
 Reply 
 

Product Spotlight

Ultrasonic Squirter/Gantry System

TecScan’s NDT Ultrasonic Gantry Systems are industrial Squirter scanners designed for non-destru
...
ctive quality testing and raster scanning of large structures and parts. The Gantry Systems are usually composed of an Industrial Mechanical Scanner and a Control Room with System Workstation.
>

Ultrasonic Testing Immersion Tanks with Unmatched Scanning Features

TecScan’s non-destructive testing Ultrasonic Immersion Tanks & scanners are designed for high pe
...
rformance and demanding NDT testing applications. Our Scan3D™ line of High Precision Immersion Tanks are specifically designed for automated ultrasonic testing of complex composites parts used in aerospace and industrial applications.
>

HARDNESS TESTER TKM-459CE combi

TKM-459CE combi applies 2 methods of hardness control: UCI and Leeb. It provides high-accuracy tes
...
ting of metals and alloys as well as items of different sizes and configurations, their hardened layers and galvanic coatings. Device represents results in HB, HRC, HV and others. Shock-, dust- and water-proof housing with intuitive software make this gauge easy to use in all working conditions.
>

Research and Applications Development For NDT

The Research and Applications Development (RAD) group is a newly formed team within Acuren dedicat
...
ed to tackling challenging inspection problems. Our focus is the development of novel, field deployable, advanced inspection techniques for use in cases where standard NDT methods are ineffective. We don't wait for new innovations, we engineer them. From concept to commissioning.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window