where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
813 views
Technical Discussions
ezhil
ezhil
18:34 Mar-14-2010
Visibilty of IQI

Is there any possibility of seeing more IQI wire than recommended as per code in X ray radiography, If yes, what are the possibilities?

 
 Reply 
 
Nigel Armstrong
Engineering, - Specialist services
United Kingdom, Joined Oct 2000, 1096

Nigel Armstrong

Engineering, - Specialist services
United Kingdom,
Joined Oct 2000
1096
06:41 Mar-15-2010
Re: Visibilty of IQI
In Reply to ezhil at 18:34 Mar-14-2010 (Opening).

Ezhil

Yes, use as low a kV as possible, smallest focal spot size available, maximum source-film distance and slowest film speed available and you will have an excellent but highly uncommercial radiographic image with more wires visible than any Code committee ever dare stipulate.

 
 Reply 
 
Jon Wallis
NDT Inspector, -
Netherlands, Joined Feb 2010, 626

Jon Wallis

NDT Inspector, -
Netherlands,
Joined Feb 2010
626
11:24 Mar-16-2010
Re: Visibilty of IQI
In Reply to Nigel Armstrong at 06:41 Mar-15-2010 .

To continue with Nigels thread....

....and place the IQI on the film side of the object, taped in close contact with the film cassette. You could also use an IQI made of denser material than the material being examined but don't forget to take out the IQI identification tag and replace it with....

You understand that I am NOT being serious. I do wonder though why you would want to produce radiographs of a better than required sensitivity.

 
 Reply 
 

Product Spotlight

TraiNDE UT

TraiNDE UT is a virtual tool associated with a signal database which simulates real inspection con
...
ditions for numerous applications (Type A/V1 block, DAC block, welds and plates).
>

CIVA 2020 UT Module

CIVA NDE Simulation Software is the world leader of NDT Simulation. The UT simulation Module incl
...
udes: - "Beam computation": Beam propagation simulation - "Inspection Simulation": Beam interaction with flaws or specimens The user can simulate a whole inspection process (pulse echo, tandem or TOFD) with a wide range of probes (conventional, Phased- arrays or EMAT), components, and flaws.
>

IRIS 9000Plus - Introducing the next generation of heat exchanger inspection.

Representing the seventh generation of the IRIS system, the IRIS 9000 Plus has nearly 200 years of c
...
ombined field inspection experience incorporated in its design. This experience combined with a strong commitment to quality and a history of innovation has made Iris Inspection Services® the undisputed leader in IRIS technology.
>

YXLON Cougar EVO

Scalable small footprint X-ray inspection systems for assembly and laboratory applications. The
...
YXLON Cougar EVO series was designed to provide the "best-in- class" inspection solutions for SMT, semiconductor, and laboratory assembly applications, while maintaining a small system footprint for maximum convenience. With optimized software and hardware, these systems produce higher quality and more consistent results than other electronics inspection systems currently on the market.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window